Asus RS500A-E6 PS4 User Guide

Asus RS500A-E6 PS4 Manual

Get Asus RS500A-E6 PS4 PDF manuals and user guides View all Asus RS500A-E6 PS4 manuals
Add to My Manuals
Save this manual to your list of manuals

Asus RS500A-E6 PS4 manual content summary:

  • Asus RS500A-E6 PS4 | User Guide - Page 1
    RS500A-E6/PS4 1U Rackmount Server User Guide
  • Asus RS500A-E6 PS4 | User Guide - Page 2
    , and should not be construed as a commitment by ASUS. ASUS assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual, including the products and software described in it. Product warranty or service will not be extended if: (1) the product is repaired
  • Asus RS500A-E6 PS4 | User Guide - Page 3
    Contents Contents...iii Notices...vii Safety information viii About this guide ix Chapter 1: Product introduction 1.1 System package contents 1-2 cover 2-2 2.2 Central Processing Unit (CPU 2-3 2.2.1 Installing the CPU 2-3 2.2.2 Installing the CPU heatsink and airduct 2-6 2.3 System memory
  • Asus RS500A-E6 PS4 | User Guide - Page 4
    Contents 2.8.2 2.8.3 Installing ASUS PIKE RAID card (optional 2-18 Installing ASMB4 series management board (optional)...2-22 Chapter 3: Installation options 3.1 Installing friction rail kit items 3-2 3.1.1 Attaching the fixing latches to the server 3-2 3.1.2 Attaching the rack rails 3-3
  • Asus RS500A-E6 PS4 | User Guide - Page 5
    5.4.1 CPU Configuration 5-14 5.4.2 Chipset Configuration 5-16 5.4.3 Onboard Devices Configuration 5-25 5.4.4 USB Configuration 5-26 5.4.5 PCIPnP 5-27 5.5 Server menu 5-28 5.6 Power menu 5-30 5.6.1 Suspend Mode [Auto 5-30 5.6.2 Repost Video on S3 Resume [No 5-30 5.6.3 ACPI 2.0 Support [ACPI
  • Asus RS500A-E6 PS4 | User Guide - Page 6
    the RAID controller driver 7-4 7.2 AMD® processor driver installation 7-14 7.3 LAN driver installation 7-15 7.4 Display driver installation 7-19 7.5 ATI SM Bus controller driver installation 7-22 7.6 Management applications and utilities installation 7-23 7.6.1 Running the support DVD
  • Asus RS500A-E6 PS4 | User Guide - Page 7
    frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no , we publish the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. vii
  • Asus RS500A-E6 PS4 | User Guide - Page 8
    by yourself. Contact a qualified service technician or your dealer. Operation Safety • Any mechanical operation on this server must be conducted by certified or experienced engineers. • Before operating the server, carefully read all the manuals included with the server package. • Before using the
  • Asus RS500A-E6 PS4 | User Guide - Page 9
    guide Audience This user guide is intended for system integrators, and experienced users with at least basic knowledge of configuring a server. Contents This guide into the barebone server. 4. parameters. 6. Chapter 6: RAID configuration This chapter tells instructions for installing the necessary
  • Asus RS500A-E6 PS4 | User Guide - Page 10
    for product and software updates. 1. ASUS Server Web-based Management (ASWM) user guide This manual tells how to set up and use the proprietary ASUS server management utility. 2. ASUS websites The ASUS websites worldwide provide updated information for all ASUS hardware and software products. Refer
  • Asus RS500A-E6 PS4 | User Guide - Page 11
    Product introduction Chapter 1 This chapter describes the general features of the chassis kit. It includes sections on front panel and rear panel specifications. ASUS RS500A-E6/PS4 1-
  • Asus RS500A-E6 PS4 | User Guide - Page 12
    Air Duct 1 x RS500A-E6/PS4 User Guide 1 x ASUS ASWM 2.0 User Guide 1 x RS500A-E6/PS4 Support CD (including ASWM*) 1 x Bag of Screws 1 x AC Power Cable 1 x Friction Rail Kit 2 x CPU Heatsinks (varies by territories) 1 x Slim-type Optical Device 1 x ASMB4-iKVM Remote Management Card 1 x PIKE RAID Card
  • Asus RS500A-E6 PS4 | User Guide - Page 13
    System specifications The ASUS RS500A-E6/PS4 is a server featuring the ASUS KGNE-D16 server board. The server supports AMD® LGA 1944 Opteron™ 6100 series processors with HyperTransport™ technology, plus other latest technologies through the chipsets onboard. Processor Support / System Bus Core
  • Asus RS500A-E6 PS4 | User Guide - Page 14
    Auxiliary Storage CD / DVD Onboard I/O OS Support Anti-virus Software Software Management Out of Band Solution Remote Management Dimension (HH x WW x DD) Net Weight Kg (CPU, DRAM & HDD not inclu ded) Power Supply Environment 1 x Slim-type Optical Device Bay (Options: No Device / DVD-RW)
  • Asus RS500A-E6 PS4 | User Guide - Page 15
    1.4 Front panel features The barebone server displays a simple yet stylish front panel with easily accessible features. The power and reset buttons, LAN do not appear on the rear panel if motherboard is not present. • *The port is for ASUS ASMB4-iKVM controller card only. ASUS RS500A-E6/PS4 1-5
  • Asus RS500A-E6 PS4 | User Guide - Page 16
    1.6 Internal features The barebone server includes the basic components as shown. 1 4 2 3 9 87 65 10 11 12 16 13 14 15 1. PCI Express G2 x16 slot Riser Card (G2 x16 link) 2. Power fans 3. ASUS KGNE-D16 server board 4. Power supply 5. System fan 1* - Connects to CPU_FAN2 connector 6. System
  • Asus RS500A-E6 PS4 | User Guide - Page 17
    the server management board. 1.7.2 LAN (RJ-45) LEDs SPEED LED ACT/LINK LED ACT/LINK LED Status Description OFF No link GREEN Linked BLINKING Data activity SPEED LED Status Description OFF 10 Mbps connection ORANGE 100 Mbps connection GREEN 1 Gbps connection ASUS RS500A-E6/PS4
  • Asus RS500A-E6 PS4 | User Guide - Page 18
    Status LED RED* GREEN/ RED* HDD Activity LED GREEN ON Blinking Blinking SATAII/SAS HDD power ON HDD has failed and should be swapped immediately RAID rebuilding Read/write data from/into the SATAII/SAS HDD *The LED status functions only when you install the optional PIKE
  • Asus RS500A-E6 PS4 | User Guide - Page 19
    Hardware setup Chapter 2 This chapter lists the hardware setup procedures that you have to perform when installing or removing system components. ASUS RS500A-E6/PS4 2-
  • Asus RS500A-E6 PS4 | User Guide - Page 20
    2.1 Chassis cover Removing the rear cover 1. Loosen the two thumbscrews on the rear panel to release the rear cover from the chassis. Thumbscrews 2. Firmly hold the cover and slide it toward the rear panel for about half an inch until it is disengaged from the chassis. 1/2 inch distance 3. Lift the
  • Asus RS500A-E6 PS4 | User Guide - Page 21
    /removal, or misplacement/loss/ incorrect removal of the PnP cap. 2.2.1 Installing the CPU To install a CPU: 1. Locate the CPU socket on the motherboard. Before installing the CPU, ensure that the socket box is facing toward you and the load lever is on your left. ASUS RS500A-E6/PS4 2-3
  • Asus RS500A-E6 PS4 | User Guide - Page 22
    is released from the retention tab. Retention tab A To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU. B Load lever 3. Lift the load lever in the direction of the arrow to a 135º angle. 4. Lift the load plate with your thumb and forefinger to
  • Asus RS500A-E6 PS4 | User Guide - Page 23
    A the retention tab. B Apply some Thermal Interface Material to the exposed area of the CPU that the heatsink will be in contact with, ensuring that it is spread in an even thin layer. Some heatsinks come with pre-applied Thermal Interface Material. If so, skip this step. ASUS RS500A-E6/PS4 2-5
  • Asus RS500A-E6 PS4 | User Guide - Page 24
    heatsink: 1. Place the heatsink on top of the installed CPU, ensuring that the two fasteners match the holes on the motherboard. 2. Twist each of the two screws with a Philips (cross) screwdriver just enough to attach
  • Asus RS500A-E6 PS4 | User Guide - Page 25
    + CPU2 configuration, install DIMMs in the order as follows: DIMM_A2 -> DIMM_E2 -> DIMM_C2 -> DIMM_G2 -> DIMM_B2 -> DIMM_F2 -> DIMM_D2 -> DIMM_H2 --> DIMM_A1 -> DIMM_E1 -> DIMM_C1 -> DIMM_G1 -> DIMM_B1 -> DIMM_F1 -> DIMM_D1 -> DIMM_H1. ASUS RS500A-E6/PS4 2-7
  • Asus RS500A-E6 PS4 | User Guide - Page 26
    Memory population table For UDIMM (Single Rank, Dual Ranks) CPU1 Configuration A2 A1 B2 B1 C2 C1 D2 D1 2 DIMMs V V 4 DIMMs V V V V 6 DIMMs V V V VVV 8 DIMMs V V V V V V V V CPU1 + CPU2 Configuration A2 A1 B2 B1 C2 C1 D2 D1 E2 E1 F2 F1 G2 G1 H2 H1 2 DIMMs V V 4 DIMMs V V V V 6
  • Asus RS500A-E6 PS4 | User Guide - Page 27
    . 2 1. Simultaneously press the retaining clips outward to unlock the DIMM. 1 1 DIMM notch Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force. 2. Remove the DIMM from the socket. ASUS RS500A-E6/PS4 2-9
  • Asus RS500A-E6 PS4 | User Guide - Page 28
    2.4 Hard disk drives The system supports four hot-swap SATAII/SAS hard disk drives. The hard disk drive installed on the drive tray connects to the motherboard SATAII/SAS ports via
  • Asus RS500A-E6 PS4 | User Guide - Page 29
    tray is correctly placed when its front edge aligns with the bay edge. 7. Repeat steps 1 to 6 if you wish to install a second SATAII/SAS drive. ASUS RS500A-E6/PS4 2-11
  • Asus RS500A-E6 PS4 | User Guide - Page 30
    2.5 Expansion slot 2.5.1 Installing an expansion card to the riser card bracket The barebone server comes with a riser card bracket. You need to remove the bracket if you want to install a PCI Express expansion card. To install a PCI Express expansion
  • Asus RS500A-E6 PS4 | User Guide - Page 31
    bracket until the golden connectors completely fit the slot and the bracket aligns with the rear panel. 3. Connect the cable(s) to the card, if applicable. ASUS RS500A-E6/PS4 2-13
  • Asus RS500A-E6 PS4 | User Guide - Page 32
    Install the software drivers for the expansion card. Standard Interrupt assignments IRQ Priority Standard function 0 1 System Timer 1 2 Keyboard Controller 2 - Programmable Interrupt 3* 11 Communications Port (COM2) 4* 12 Communications Port (COM1) 5* 13 -- 6 14 Floppy Disk
  • Asus RS500A-E6 PS4 | User Guide - Page 33
    connectors (from motherboard to SATAII/SAS backplane board) 8. SAS connectors (from motherboard to SATAII/SAS backplane board) 9. Auxiliary panel connector (from motherboard to front I/O board) ASUS RS500A-E6/PS4 2-15
  • Asus RS500A-E6 PS4 | User Guide - Page 34
    ) pins 2-3 (Add-on card) Connects a 8-pin plug from power supply Connects the data cables connected to the motherboard Connect the SATAII/SAS HDDs * For PIKE RAID solution, ensure to connect SAS_SGPIO_CON1 to the SGPIO1 connector on the motherboard. 2-16 Chapter 2: Hardware setup
  • Asus RS500A-E6 PS4 | User Guide - Page 35
    This section tells how to remove/install the following components: 1. System fans 2. ASUS PIKE RAID card (optional) 3. ASUS ASMB4-iKVM (optional) Ensure that the system is turned off before removing any Connect the system fan cable to the fan connector on the motherboard. ASUS RS500A-E6/PS4 2-17
  • Asus RS500A-E6 PS4 | User Guide - Page 36
    card (optional) Follow the steps below to install an optional ASUS RAID card on your motherboard. If you install the PIKE 1078 or PIKE 2008 Series SAS RAID card, follow steps 1 and 2 to remove the outer heatsink on RAID card. 1. Remove the two screws that secure the heatsink bracket on the back of
  • Asus RS500A-E6 PS4 | User Guide - Page 37
    RAID card slot. 6. Remove the data cables connected to the SATA connectors on the motherboard. 7. Connect the data cables, by numerial order, to the SAS connectors labeled SAS1-4 (red) on the motherboard. 8. Remove the SGPIO cable from the SGPIO3 connector on the motherboard. ASUS RS500A-E6/PS4
  • Asus RS500A-E6 PS4 | User Guide - Page 38
    9. Connect the SGPIO cable to the SGPIO1 connector on the motherboard. 10. Set the SGPIO_SEL1 jumper on the backplane to pin 2-3 when connecting data cables to the SAS connectors on the motherboard. The heatsink on PIKE 1078/PIKE 2008 Series might interfere the components on the expansion card.
  • Asus RS500A-E6 PS4 | User Guide - Page 39
    Installing i Button (for PIKE 1078 only) Follow the steps below to install an optional i Button on your motherboard. 1. Locate the I Button slot on the motherboard. 2. Snap the I Button in place. ASUS RS500A-E6/PS4 2-21
  • Asus RS500A-E6 PS4 | User Guide - Page 40
    and press the ASMB4 management card in place. 3. Insert the LAN cable plug to the LAN port 3 (dedicated LAN) or LAN port 1 (shared LAN) for server management. LAN port 3 LAN port 1 2-22 Chapter 2: Hardware setup
  • Asus RS500A-E6 PS4 | User Guide - Page 41
    Installation options Chapter 3 This chapter describes how to install the optional components and devices into the barebone server. ASUS RS500A-E6/PS4 2-
  • Asus RS500A-E6 PS4 | User Guide - Page 42
    : • Two pairs of rack rails (for the rack) • Nut-and-bolt type screws and one pair of server latches Nuts and screws Front rack rails Rear rack rails 3.1.1 Attaching the fixing latches to the server Refer to the image below for the locations to attach the two fixing latches to the two
  • Asus RS500A-E6 PS4 | User Guide - Page 43
    Front rail rack joints Rear rail rack slots 3. Select one unit of space (1U) on the rack where you want to install the barebone server. 4. Measure the depth of the rack to determine the length of the 9 to assemble and attach the rack rail on the other 8 side. 9 8 9 7 ASUS RS500A-E6/PS4 3-3
  • Asus RS500A-E6 PS4 | User Guide - Page 44
    the way to the depth of the rack. 2. Tighten the two rack screws to secure the server in place. To uninstall the server from the rack 1. Loosen the rack screws that secured the server to the rack. 2. Pull the server from the rack. Remember to press the latches on both sides to release the
  • Asus RS500A-E6 PS4 | User Guide - Page 45
    of the server rail to the side of the chassis, matching each of the three hooks to the holes on the rail. Then slide the rail toward the front panel until it locks in place. 2. Secure the front end of the server rail to the side of the chassis with one screw. ASUS RS500A-E6/PS4 3-5
  • Asus RS500A-E6 PS4 | User Guide - Page 46
    the other side of the chassis. 3.2.2 Attaching the rack rails To attach the rack rails: 1. Select one unit of space (1U) on the rack where you want to install the barebone server. 2. Install the nuts on the holes of the 1U space on the rack front. 3. Install the nuts on the holes of the
  • Asus RS500A-E6 PS4 | User Guide - Page 47
    Tighten the two rack screws to secure the server in place. To uninstall the server from the rack: 1. Loosen the rack screws that secured the server to the rack. 2. Pull the server from the rack. Remember to press the latches on both sides to release the server from the rack. ASUS RS500A-E6/PS4 3-7
  • Asus RS500A-E6 PS4 | User Guide - Page 48
    3-8 Chapter 3: Installation options
  • Asus RS500A-E6 PS4 | User Guide - Page 49
    Motherboard info Chapter 4 This chapter includes the motherboard layout, and brief descriptions of the jumpers and internal connectors. ASUS RS500A-E6/PS4 3- 4-1
  • Asus RS500A-E6 PS4 | User Guide - Page 50
    4.1 Motherboard layouts 4-2 Chapter 4: Motherboard information
  • Asus RS500A-E6 PS4 | User Guide - Page 51
    controller setting (3-pin VGA_SW1)) 3. CPU Fan and Chassis Fan control setting (3-pin CPUFAN_SEL1, CHAFAN_SEL1) 4. LAN controller setting (3-pin LAN_SW1, LAN_SW2) 5. DDR3 voltage control ) Page 4-8 4-8 4-9 4-9 4-10 4-10 4-11 4-11 4-12 4-12 4-13 4-13 4-14 4-15 4-16 ASUS RS500A-E6/PS4 4-3
  • Asus RS500A-E6 PS4 | User Guide - Page 52
    4.2 Jumpers 1. Clear RTC RAM (CLRTC1) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system
  • Asus RS500A-E6 PS4 | User Guide - Page 53
    pin selection. The CPUFAN_SEL1 jumper is for the CPU fans control and the CHAFAN_SEL1 jumper is for the front fans and rear fans control. Set to pins 1-2 when using 4-pin fans a 4-pin fan, the fan control will not work and the fan you installed will always run at full speed. ASUS RS500A-E6/PS4 4-5
  • Asus RS500A-E6 PS4 | User Guide - Page 54
    pin LAN_SW1, LAN_SW2) These jumpers allow you to enable or disable the onboard Intel® 82574L Gigabit LAN controllers. Set to pins 1-2 to activate the Gigabit LAN feature. 5. DDR3 voltage control setting (4-pin LVDDR3_SEL1; LVDDR3_SEL2) These jumpers allow you to adjust the DIMM voltage. Set to pins
  • Asus RS500A-E6 PS4 | User Guide - Page 55
    and turn on the system to recover or update the BIOS. 3. Shut down the system. 4. Set the jumper back to pins 1-2. 5. Turn on the system. ASUS RS500A-E6/PS4 4-7
  • Asus RS500A-E6 PS4 | User Guide - Page 56
    Attached SCSI (SAS) connectors, the next-generation storage technology that supports both Serial Attached SCSI (SAS) and Serial ATA (SATA). Each connector supports one device. • These connectors function only when you install a PIKE RAID card. • Connect the SAS hard disk drives to SAS connectors
  • Asus RS500A-E6 PS4 | User Guide - Page 57
    USB34 and USB56, then install the modules to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. ASUS RS500A-E6/PS4 4-9
  • Asus RS500A-E6 PS4 | User Guide - Page 58
    to monitor temperature. 6. CPU, front and rear fan connectors (4-pin CPU_FAN1, CPU_FAN2, FRNT_FAN1, FRNT_FAN2, FRNT_FAN3, FRNT_FAN4, FRNT_FAN5, REAR_FAN1) The fan connectors support cooling fans of 350 mA ! • All fans feature the ASUS Fan Speed technology. 4-10 Chapter 4: Motherboard information
  • Asus RS500A-E6 PS4 | User Guide - Page 59
    , device information and general purpose data. These connectors functions only when you install an ASUS PIKE SAS RAID card. 8. Serial General Purpose Input/Output connector (8-1 pin SGPIO3) This connector is used for the SGPIO peripherals of the PROMISE® RAID SATA LED. ASUS RS500A-E6/PS4 4-11
  • Asus RS500A-E6 PS4 | User Guide - Page 60
    opening at the back of the system chassis. The serial port module is purchased separately. 10. BMC header (BMC_FW1) The BMC connector on the motherboard supports an ASUS® Server Management Board 4 Series (ASMB4). 4-12 Chapter 4: Motherboard information
  • Asus RS500A-E6 PS4 | User Guide - Page 61
    11. TPM connector (20-1 pin TPM) This connector supports a Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM . Devices communicate with an SMBus host and/or other SMBus devices using the SMBus interface. ASUS RS500A-E6/PS4 4-13
  • Asus RS500A-E6 PS4 | User Guide - Page 62
    13. SSI power connectors (24-pin SSIPWR1, 8-pin SSI12V1, 8-pin SSI12V2) These connectors are for the SSI power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. • DO
  • Asus RS500A-E6 PS4 | User Guide - Page 63
    connector (20-pin PANEL1) This connector supports several chassis-mounted functions. 1. System LED cable that connects to the front message LED. The message LED is controlled by Hardware monitor to indicate an abnormal event occurance. 3. System warning the system power. ASUS RS500A-E6/PS4 4-15
  • Asus RS500A-E6 PS4 | User Guide - Page 64
    15. Auxiliary panel connector (20-pin AUX_PANEL1) This connector is for additional front panel features including front panel SMB, locator LED and switch, chassis intrusion, and LAN LEDs. 1. Front panel SMB (6-1 pin FPSMB) These leads connect the front panel SMBus cable. 2. LAN activity LED (2-pin
  • Asus RS500A-E6 PS4 | User Guide - Page 65
    Chapter 5 This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. BIOS setup ASUS RS500A-E6/PS4 3-
  • Asus RS500A-E6 PS4 | User Guide - Page 66
    you to update the BIOS without having to use a DOS‑based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com. To update the BIOS using EZ Flash 2 1. Insert the USB flash disk that contains the latest BIOS file to the USB port
  • Asus RS500A-E6 PS4 | User Guide - Page 67
    to a bootable USB flash disk drive. 2. Copy the BUPDATER utility (BUPDATER.exe) from the ASUS support website at support.asus.com to the bootable USB flash disk drive you created earlier. 3. Boot the system in DOS disk drive, then press . A:\>BUPDATER /i[file name].ROM ASUS RS500A-E6/PS4 5-3
  • Asus RS500A-E6 PS4 | User Guide - Page 68
    4. The utility verifies the file, then starts updating the BIOS file. ASUSTek BIOS Update for DOS V1.06 (09/08/04) FLASH TYPE: MXIC 25L1605A Current ROM BOARD: KGNE-D16 VER: 0201 DATE: 04/30/2010 Update ROM BOARD: KGNE-D16 VER: 0202 DATE: 05/21/2010 PATH: WARNING! Do not turn off power
  • Asus RS500A-E6 PS4 | User Guide - Page 69
    BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when boot failure! The recovered BIOS may not be the latest BIOS version for this motherboard. Visit the ASUS website at www.asus.com to download the latest BIOS file. ASUS RS500A-E6/PS4 5-5
  • Asus RS500A-E6 PS4 | User Guide - Page 70
    5.2 BIOS setup program This motherboard supports a programmable firmware chip that you can update using the provided utility not exactly match what you see on your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS file for this motherboard. 5-6 Chapter 5: BIOS setup
  • Asus RS500A-E6 PS4 | User Guide - Page 71
    menu bar on top of the screen has the following main items: Main Advanced Server Power Boot Tools Exit For changing the basic system configuration For changing the advanced system the settings. The navigation keys differ from one screen to another. ASUS RS500A-E6/PS4 5-7
  • Asus RS500A-E6 PS4 | User Guide - Page 72
    5.2.4 Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power, Boot, and Exit) on the menu bar have their respective menu items. System Time System Date SATA1 SATA2 SATA3
  • Asus RS500A-E6 PS4 | User Guide - Page 73
    menu screen for information on the menu screen items and how to navigate through them. Main Advanced BIOS SETUP UTILITY Server Power Boot Tools Exit System Time [13:44:30] System Date [Fri 05/07/2010] SATA 1 SATA [Day xx/xx/xxxx] Allows you to set the system date. ASUS RS500A-E6/PS4 5-9
  • Asus RS500A-E6 PS4 | User Guide - Page 74
    in SATA 5/6 only. LBA/Large Mode [Auto] Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled. Configuration options: [Disabled] [Auto] Block (Multi-Sector Transfer) M [Auto
  • Asus RS500A-E6 PS4 | User Guide - Page 75
    Access) allows your computer to transfer data to and from the hardware devices installed with much less CPU overhead. The DMA mode consists of SDMA (single-word DMA), MDMA (multi-word DMA), and UDMA the onboard SATA channel. Configuration options: [Disabled] [Enabled] ASUS RS500A-E6/PS4 5-11
  • Asus RS500A-E6 PS4 | User Guide - Page 76
    for the Serial ATA connectors supported by the Southbridge chip. Configuration options: [IDE] [RAID] [AHCI] • If RAID sets with the PROMISE® RAID utility from the Serial ATA hard disk drives, set this item to [RAID]. • If you want the Serial ATA hard disk drives to use the Advanced Host Controller
  • Asus RS500A-E6 PS4 | User Guide - Page 77
    Configuration Allows you to check information of installed memory (8 DIMMs per CPU). CPU1/2 Memory Configuration Displays the auto-detected memory specification. Main CPU1 DIMM_C1 DIMM_C2 DIMM_D1 DIMM_D2 N/A 2048 MB, 2R, 1067 N/A N/A N/A N/A N/A N/A BIOS SETUP UTILITY ASUS RS500A-E6/PS4 5-13
  • Asus RS500A-E6 PS4 | User Guide - Page 78
    Server BIOS SETUP UTILITY Power Boot Tools CPU Configuration Chipset Configuration Onborad Devices Configuration USB Configuration PCIPnP Exit Configure CPU may not appear if your CPU does not support the related functions. Advanced BIOS SETUP UTILITY CPU Configuration Module Version: 5.1102.1
  • Asus RS500A-E6 PS4 | User Guide - Page 79
    ] Allows you to enable or disable the C1E support function. This item should be enabled in order to enable the Enhanced Halt State. Configuration options: [Disabled] [Enabled] CPU2 [Enabled] Allows you to enable or disable CPU2. Configuration options: [Enabled] [Disabled] ASUS RS500A-E6/PS4 5-15
  • Asus RS500A-E6 PS4 | User Guide - Page 80
    Configuration Advanced BIOS SETUP UTILITY NorthBrideg Chipset Configuration Memory Configuration ECC Configuration DRAM Timing Configuration Memroy Timing Parameters [CPU Node 0] Memory CLK :533 MHz, N/A CAS Latency(Tcl) :7 CLK , N/A RAS/CAS Delay(Trcd) :7 CLK , N/A Row Precharge Time
  • Asus RS500A-E6 PS4 | User Guide - Page 81
    in each node. Configuration options: [Disabled] [Enabled] Bank Swizzle Mode [Enabled] Allows you to enable or disable the Bank Swizzle mode. Configuration options: [Disabled] [Enabled] ASUS RS500A-E6/PS4 5-17
  • Asus RS500A-E6 PS4 | User Guide - Page 82
    MHz] This item appears only when you set the DRAM Timing Config item to [Manual] and allows you to set the memory clock frequency. Configuration options: [400 MHz] [533 MHz] [667 MHz] Memory Timing Parameters [CPU Node 0] Allows you to select which node's timing parameters to display. 5-18 Chapter
  • Asus RS500A-E6 PS4 | User Guide - Page 83
    will enable some power savings. Configuration options: [Disable] [Enabled] The hot-plug function will be disabled when turning off the clock for the SATA port. ASUS RS500A-E6/PS4 5-19
  • Asus RS500A-E6 PS4 | User Guide - Page 84
    SATA-AHCI Ports Auto Clk Ctrl [Disable] When set to [Enabled], the system will turn off the clocks for the unused SATA ports in AHCI modes. Doing so will enable some power savings. Configuration options: [Disable] [Enabled] The hot-plug function will be disabled when turning off the clock for the
  • Asus RS500A-E6 PS4 | User Guide - Page 85
    Express Configuration Hyper Transport Configuration IOMMU [Disabled] Primary Video Controller [Slot1-PIKE-PCI] Debug Option PCI Express Configurat ←→ ] Configuration options: [Disabled] [Enable] Lane Reversal [Disabled] Configuration options: [Disabled] [Enabled] ASUS RS500A-E6/PS4 5-21
  • Asus RS500A-E6 PS4 | User Guide - Page 86
    Press to display the sub-items. NB-SB Link ASPM [L1] Configuration options: [Disabled] [L1] NP NB-SB VC1 Traffic Support [Disabled] Configuration options: [Disabled] [Enabled] Complicance Mode [Disabled] Configuration options: [Disabled] [Enable] PCIE Slot 1/PIKE Slot/SB Core Setting Select
  • Asus RS500A-E6 PS4 | User Guide - Page 87
    08dB] [-3.1dB] [-4.22dB] [-5.50dB] [-7.05dB] IOMMU [Disabled] Configuration options: [Disabled] [Enable] Primary Video Controller [Slot1-PIKE-PCI] Allows you to select the primary video controller. Configuration options: [Slot1-PIKE-PCI] [PIKE-Slot1-PCI] [PCI-Slot1-PIKE] ASUS RS500A-E6/PS4 5-23
  • Asus RS500A-E6 PS4 | User Guide - Page 88
    Debug Option Advanced Memory Decode on Sec. GFX IOC Peer-to-Peer Mode Northbridge interrupt pin [Disable] [Auto] [Disable] Options Disable Force ←→ Select Screen ↑↓ Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2010, American Megatrends,
  • Asus RS500A-E6 PS4 | User Guide - Page 89
    ] [2E8/IRQ3] Onboard LAN1/LAN2 Chip [Enabled] Enables or disables the onboard LAN1/2 controller. Configuration options: [Disabled] [Enabled] Onboard LAN1/LAN2 Boot [PXE] Allows you to configure the onboard LAN1/2 boot mode. Configuration options: [Disabled] [PXE] [iSCSI] ASUS RS500A-E6/PS4 5-25
  • Asus RS500A-E6 PS4 | User Guide - Page 90
    - 2.24.5-13.4 USB Devices Enabled : None Legacy USB Support USB 2.0 Controller Mode BIOS EHCI Hand-Off Legacy USB1.1 HC Support [Enabled] [HiSpeed] [Enabled] [Enabled] Enables support for legacy USB. AUTO option disables legacy support if no USB devices are connected. ←→ Select Screen
  • Asus RS500A-E6 PS4 | User Guide - Page 91
    if you install a Plug and Play operating system, the operating system configures the Plug and Play devices not required for boot. Configuration options: [No] [Yes] ASUS RS500A-E6/PS4 5-27
  • Asus RS500A-E6 PS4 | User Guide - Page 92
    an item then press to display the configuration options. Server BIOS SETUP UTILITY Configure Remote Access type and parameters Remote Access Enabled] Serial port number Base Address, IRQ Serial Port Mode Flow Control Redirection After BIOS POST Terminal Type [COM2] [2F8h, 3] [
  • Asus RS500A-E6 PS4 | User Guide - Page 93
    [57600 8,n,1] [38400 8,n,1] [19200 8,n,1] [09600 8,n,1] Flow Control [Hardware] Allows you to select the flow control for console redirection. Configuration options: [None] [Hardware] [ you to select the target terminal type. Configuration options: [ANSI] [VT100] [VT-UTF8] ASUS RS500A-E6/PS4 5-29
  • Asus RS500A-E6 PS4 | User Guide - Page 94
    Advanced Server BIOS SETUP UTILITY Power Boot Tools Exit Suspend Mode Repost Video on S3 Resume ACPI 2.0 Support ACPI APIC support [Auto the Advanced Configuration and Power Interface (ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When set to Enabled, the ACPI
  • Asus RS500A-E6 PS4 | User Guide - Page 95
    selection. System Time [12:30:30] Use the , or key to select a field. Use the or key to configure alarm time. ASUS RS500A-E6/PS4 5-31
  • Asus RS500A-E6 PS4 | User Guide - Page 96
    automatically detects and displays the speed of CPU fans, front fans, and rear fan in rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows [N/A]. Fan Speed Control [Generic Mode] Allows you to configure the ASUS Smart Fan feature that smartly adjusts the
  • Asus RS500A-E6 PS4 | User Guide - Page 97
    The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. Select [Ignored] if you do not want to detect this item. ASUS RS500A-E6/PS4 5-33
  • Asus RS500A-E6 PS4 | User Guide - Page 98
    menu items allow you to change the system boot options. Select an item then press to display the submenu. Main Advanced Server BIOS SETUP UTILITY Power Boot Tools Boot Settings Boot Device Priority Hard Disk Drives CDROM Drives Boot Settings Configuration Security Exit Specifies the
  • Asus RS500A-E6 PS4 | User Guide - Page 99
    feature. Configuration options: [Disabled] [Enabled] Set this item to [Enabled] to use the ASUS MyLogo2™ feature. AddOn ROM Display Mode [Force BIOS] Allows you to set the display mode for the option ROMs to trap Interrupt 19. Configuration options: [Disabled] [Enabled] ASUS RS500A-E6/PS4 5-35
  • Asus RS500A-E6 PS4 | User Guide - Page 100
    5.7.4 Security The Security menu items allow you to change the system security settings. Select an item then press to display the configuration options. BIOS SETUP UTILITY Boot Security Settings Supervisor Password : Not Installed User Password : Not Installed to change
  • Asus RS500A-E6 PS4 | User Guide - Page 101
    to allow you to change other security settings. Main Advanced BIOS SETUP UTILITY Server Power Boot Tools Exit Supervisor Password : Installed User Password : Not Installed Change when accessing Setup and booting the system. Configuration options: [Setup] [Always] ASUS RS500A-E6/PS4 5-37
  • Asus RS500A-E6 PS4 | User Guide - Page 102
    . Select an item then press to display the submenu. Main Advanced ASUS EZ Flash 2 Server BIOS SETUP UTILITY Power Boot Tools Exit Press ENTER to run the utility to select and update BIOS. This uitlity supports 1. FAT 12/16/32 (r/w) 2. NTFS (read only) 3. CD-DISC (read only) ←→ Select
  • Asus RS500A-E6 PS4 | User Guide - Page 103
    values for the BIOS items, and save or discard your changes to the BIOS items. Main Advanced Server BIOS SETUP UTILITY Power Boot Tools Exit Exit Options Exit & Save Changes Exit & Discard Changes or make other changes before saving the values to the non-volatile RAM. ASUS RS500A-E6/PS4 5-39
  • Asus RS500A-E6 PS4 | User Guide - Page 104
    5-40 Chapter 5: BIOS setup
  • Asus RS500A-E6 PS4 | User Guide - Page 105
    RAID configuration Chapter 6 This chapter provides instructions for setting up, creating and configuring RAID sets using the available utilities. ASUS RS500A-E6/PS4 3-
  • Asus RS500A-E6 PS4 | User Guide - Page 106
    and refers to hard disk drives that are not yet configured as a RAID set. This configuration stores the same data redundantly on multiple disks that from a hard disk drive included in a created RAID set, copy first the RAID driver from the support CD to a floppy disk before you install an operating
  • Asus RS500A-E6 PS4 | User Guide - Page 107
    the Main Menu > Storage Configuration, then press . 3. Set SATA Port1-4 to [RAID] and SATA Port5-6 will be set to [RAID] too. 4. Press to save your changes and exit the BIOS Setup. Refer to Chapter 5 for details on entering and navigating through the BIOS Setup. ASUS RS500A-E6/PS4 6-3
  • Asus RS500A-E6 PS4 | User Guide - Page 108
    Serial ATA connectors supported by the Promise RAID. To enter Promise Technology, Inc. [ Main Menu ] View Drive Assignment .......[ 1 ] LD View / LD Define Menu .....[ 2 ] Delete LD Menu 3 ] Controller Configuration .....[ 4 ] [ Keys Available ] Press 1..4 to Select Option [ESC]Exit The RAID
  • Asus RS500A-E6 PS4 | User Guide - Page 109
    ] Press 1..4 to Select Option FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc. [ LD View Menu ] [ESC]Exit < There is no any LD > [ Keys Available ] [↑] Up [↓] Down [PaUp/PaDn] Switch Page [Ctrl+C] Define LD [Enter] View LD [Ctrl+V] View JBOD Disk [ESC] Exit ASUS RS500A-E6/PS4 6-5
  • Asus RS500A-E6 PS4 | User Guide - Page 110
    Policy to Read Cache and Write Policy to WriteBack. FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc. [ LD Define Menu ] LD No LD Name LD 1 Logical Drive 1 RAID Mode Drv RAID 1 0 Stripe Block Gigabyte Boundary Read Policy 128 KB ON Read Cache Initialization Write Policy Fast
  • Asus RS500A-E6 PS4 | User Guide - Page 111
    disks for the RAID set. FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc. [ LD Define Menu ] LD No LD Name LD 1 Logical Drive 1 RAID Mode Drv RAID 1 1 Stripe Block [↑] Up [↓] Down [PaUp/PaDn] Switch Page [Space] Change Option [Ctrl+Y] Save [ESC] Exit ASUS RS500A-E6/PS4 6-7
  • Asus RS500A-E6 PS4 | User Guide - Page 112
    disk drives will be deleted. Press + to continue. FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc. [ LD Define Menu ] LD No LD Name LD 1 Logical Drive 1 RAID Mode Drv RAID 1 2 Stripe Block Gigabyte Boundary Read Policy 128 KB ON Read Cache Initialization Write Policy
  • Asus RS500A-E6 PS4 | User Guide - Page 113
    (tm) Utility (c) 2004-2010 Promise Technology, Inc. [ LD Define Menu ] LD No LD Name LD 1 Logical Drive 1 RAID Mode Drv RAID 1 2 Stripe Block Gigabyte Boundary Read /PaDn] Switch Page [Space] Change Option [0-9] Input Capacity [Enter] Save [BackSpace] Delete [Esc] Exit ASUS RS500A-E6/PS4 6-9
  • Asus RS500A-E6 PS4 | User Guide - Page 114
    View JBOD Disk [ESC] Exit 11. Press any key to return to the main control panel. FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc. [ View LD Definition Menu] LD No LD Name LD 1 RAID1 RAID Mode Drv RAID 1 2 Capacity(GB) 199.99 Stripe Block Read Policy NA Read Cache Write Policy
  • Asus RS500A-E6 PS4 | User Guide - Page 115
    (tm) Utility (c) 2004-2010 Promise Technology, Inc. [ Delete LD Menu ] LD No RAID Mode Drv Capacity(GB) Status LD 1 RAID 1 2 199.99 Functional [ Keys Available ] [↑] Up [↓] Down [PaUp/PaDn] Switch Page [Del/Alt+D] Delete LD [Ctrl+V] View JBOD Disk [ESC] Exit ASUS RS500A-E6/PS4 6-11
  • Asus RS500A-E6 PS4 | User Guide - Page 116
    Ctrl-Y to delete the data in the disk! or press any other key to abort... [ Keys Available ] 4. The selected RAID set has been deleted. FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc. [ Delete LD Menu ] < There is no any LD > [ Keys Available ] [↑] Up [↓] Down [PaUp/PaDn] Switch Page
  • Asus RS500A-E6 PS4 | User Guide - Page 117
    To view the drive assignment: 1. From the main control panel, press to to enter the Drive Assignment Menu. FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc. [ Main Menu ] View Drive Assignment +H] Full Erase [ESC] Exit [↑] Up [↓] Down [PaUp/PaDn] Switch Page ASUS RS500A-E6/PS4 6-13
  • Asus RS500A-E6 PS4 | User Guide - Page 118
    resources configuration is displayed as shown. FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc. [ Adapter Configuration - Options ] No Parameters Defined for Current Disk(s)... [ System Resources Configuration ] Controller IRQ: 10 AHCI HBA MMIO Base Address: FAFFE400 [ESC] Exit [ Keys
  • Asus RS500A-E6 PS4 | User Guide - Page 119
    Driver installation Chapter 7 This chapter provides instructions for installing the necessary drivers for different system components. ASUS RS500A-E6/PS4
  • Asus RS500A-E6 PS4 | User Guide - Page 120
    installation After creating the RAID sets for your server system, you are now ready to install an operating system to the independent hard disk drive or bootable array. This part provides instructions on how to install the RAID controller drivers during OS installation. The RAID card driver might be
  • Asus RS500A-E6 PS4 | User Guide - Page 121
    32 bit SLES 10 SP3 64 bit SLES 11 32 bit SLES 11 64 bit CentOS 5.4 32 bit CentOS 5.4 64 bit Back Exit 6. Locate the RAID driver and place a blank, high-density floppy disk to the floppy disk drive. 7. Press . 8. Follow screen instructions to create the driver disk. ASUS RS500A-E6/PS4 7-3
  • Asus RS500A-E6 PS4 | User Guide - Page 122
    7.1.2 Installing the RAID controller driver Windows® Server OS During Windows® Server OS installation To install the RAID controller driver when installing Windows® Server OS: 1. Boot the computer using the Windows® Server installation DVD. The Windows® Server OS Setup starts. Windows Setup Press
  • Asus RS500A-E6 PS4 | User Guide - Page 123
    screen instructions to continue. To an existing Windows® Server OS To install the RAID controller driver on an existing Windows® Server OS the RAID controller drivers. When found, click Next to install the drivers. 11. Click Finish after the driver installation is done. ASUS RS500A-E6/PS4 7-5
  • Asus RS500A-E6 PS4 | User Guide - Page 124
    Manager button. 3. Click the "+" sign before the item SCSI and RAID controllers, and then the Promise AHCI Compatible RAID Controller item should appear. The screen differs based on the controller. 4. Right-click the RAID controller driver item, and then select Properties from the menu. 5. Click
  • Asus RS500A-E6 PS4 | User Guide - Page 125
    Red Hat® Enterprise Linux OS 4.7/4.8 To install the RAID controller driver when installing Red Hat® Enterprise OS: 1. Boot the system from the Red Hat® OS installation CD. 2. At the to continue. More Driver Disks? Do you wish to load any more driver disks? Yes No ASUS RS500A-E6/PS4 7-7
  • Asus RS500A-E6 PS4 | User Guide - Page 126
    begin testing the CD media before installation press OK. Choose Skip to skip the media test and start the installation. OK Skip 8. Follow the onscreen instructions to finish installing the RedHat operating system. 7-8 Chapter 7: Driver installation
  • Asus RS500A-E6 PS4 | User Guide - Page 127
    To install the RAID controller driver when RAID driver disk to the floppy disk drive, select OK, then press . Insert Driver Disk Insert your driver disk into /dev/fd0 and press "OK" to continue. OK Back The drivers for the RAID card are installed to the system. ASUS RS500A-E6/PS4
  • Asus RS500A-E6 PS4 | User Guide - Page 128
    6. When asked if you will load additional RAID controller drivers, select No, then press . More Driver Disks? Do you wish to load any more driver disks? Yes No 7. Follow the onscreen instructions to finish the OS installation. 7-10 Chapter 7: Driver installation
  • Asus RS500A-E6 PS4 | User Guide - Page 129
    SUSE Linux 11 OS To install the RAID controller driver when installing SUSE Linux Enterprise Server OS: 1. Boot the system from the SUSE OS installation CD. 2. Use the arrow keys to select English(US) 1024 X768 F4 Source DVD Yes No File URL F5 Kernel F6 Driver Default No ASUS RS500A-E6/PS4 7-11
  • Asus RS500A-E6 PS4 | User Guide - Page 130
    4. Insert the RAID driver disk to the floppy disk drive. Type the command acpi=off apic=bigsmp brokenmodules=ahci in Boot Options field, and press . Boot from
  • Asus RS500A-E6 PS4 | User Guide - Page 131
    as shown below. Please choose the Driver Update medium. sda: USB Floppy sr0: CD-ROM, ASUS DRW-1612BLT sdb: Disk, Promise 1X2 Morror/RAID1 sd3: Disk, Promise RAID Console other device OK Back 7. Select Back and follow the onscreen instructions to finish the installation. ASUS RS500A-E6/PS4 7-13
  • Asus RS500A-E6 PS4 | User Guide - Page 132
    7.2 AMD® processor driver installation This section provides instructions on how to install the AMD® processor driver on the system. You need to manually install the AMD® processor driver on a Windows Server 2003 operating system. To install the Intel® chipset device software: 1. Restart the
  • Asus RS500A-E6 PS4 | User Guide - Page 133
    is enabled in your computer. If Autorun is NOT enabled in your computer, browse the contents of the support DVD to locate the file AUTORUN.EXE and double-click the AUTORUN.EXE and follow step 4 to run the installation. 3. Click Intel® PRO/1000 Gigabit Adapters Driver. ASUS RS500A-E6/PS4 7-15
  • Asus RS500A-E6 PS4 | User Guide - Page 134
    4. When the Intel® Network Connections - InstallShield Wizard window appears, click Next to start the installation. 5. Click I accept the terms in the license agreement and then click Next to continue. 7-16 Chapter 7: Driver installation
  • Asus RS500A-E6 PS4 | User Guide - Page 135
    6. Select the programs you want to install and click Next to continue. 7. Click Install to start the installation. ASUS RS500A-E6/PS4 7-17
  • Asus RS500A-E6 PS4 | User Guide - Page 136
    8. The programs you select are being installed. 9. Click Finish to finish the installation. 7-18 Chapter 7: Driver installation
  • Asus RS500A-E6 PS4 | User Guide - Page 137
    the Drivers menu if Autorun is enabled in your computer. If Autorun is NOT enabled in your computer, browse the contents of the support DVD to locate the file AUTORUN.EXE and double-click the AUTORUN.EXE to run the support DVD. 3. Click ASPEED AST2050 Display Driver. ASUS RS500A-E6/PS4 7-19
  • Asus RS500A-E6 PS4 | User Guide - Page 138
    4. When the ASPEED InstallShield Wizard window appears, click Next to continue. 5. Click Install to start the installation. 7-20 Chapter 7: Driver installation
  • Asus RS500A-E6 PS4 | User Guide - Page 139
    6. The system installs the driver automatically. 7. When the installation completes, click Finish to exit the wizard. ASUS RS500A-E6/PS4 7-21
  • Asus RS500A-E6 PS4 | User Guide - Page 140
    7.5 ATI SM Bus controller driver installation This section provides instructions on how to install the ATI SM Bus driver on the system. You need to manually install the ATI SMBus driver on a Windows® Server 2003 operating system. To install the driver: 1. Restart the computer, then log on with
  • Asus RS500A-E6 PS4 | User Guide - Page 141
    The contents of the support DVD are subject to change at any time without notice. Visit the ASUS website (www.asus.com) for updates. 7.6.1 Running the support DVD Place the support DVD to the optical display and driver options vary under different operating system versions. ASUS RS500A-E6/PS4 7-23
  • Asus RS500A-E6 PS4 | User Guide - Page 142
    supports. Click an item to install. 7.6.4 Make disk menu The Make disk menu contains items to create the RAID driver disk. 7.6.5 Contact information Click the Contact tab to display the ASUS contact information. You can also find this information on the inside front cover of this user guide
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
1U Rackmount Server
RS500A-E6/PS4
User Guide