Asus RS500A-E6 PS4 User Guide - Page 38
Set the SGPIO_SEL1 jumper on, the backplane to pin 2-3 when, Connect the SGPIO cable to, the SGPIO1
View all Asus RS500A-E6 PS4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
9. Connect the SGPIO cable to the SGPIO1 connector on the motherboard. 10. Set the SGPIO_SEL1 jumper on the backplane to pin 2-3 when connecting data cables to the SAS connectors on the motherboard. The heatsink on PIKE 1078/PIKE 2008 Series might interfere the components on the expansion card. Ensure that the height of the components is less than 5.8 mm. 2-20 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-20
The heatsink on PIKE 1078/PIKE 2008 Series might interfere the components
on the expansion card. Ensure that the height of the components is less than
5.8 mm.
10.
Set the SGPIO_SEL1 jumper on
the backplane to pin 2-3 when
connecting data cables to the SAS
connectors on the motherboard.
9.
Connect the SGPIO cable to
the SGPIO1 connector on the
motherboard.