Asus RS926-E7 RS8 User Guide - Page 36
Carefully insert the drive tray and, Push the tray lever until it clicks, and, Repeat steps 1 to 6
View all Asus RS926-E7 RS8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
5. Carefully insert the drive tray and push it all the way to the depth of the bay until just a small fraction of the tray edge protrudes. When installed, the SATAII/SAS connector on the drive connects to the SATAII/ SAS interface on the backplane. 6. Push the tray lever until it clicks, and secures the drive tray in place. The drive tray is correctly placed when its front edge aligns with the bay edge. 7. Repeat steps 1 to 6 if you wish to install a second SATAII/SAS drive. 2-14 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-14
5.
Carefully insert the drive tray and
push it all the way to the depth of
the bay until just a small fraction of
the tray edge protrudes.
6.
Push the tray lever until it clicks, and
secures the drive tray in place. The
drive tray is correctly placed when
its front edge aligns with the bay
edge.
7.
Repeat steps 1 to 6 if you wish to
install a second SATAII/SAS drive.
When installed, the SATAII/SAS connector on the drive connects to the SATAII/
SAS interface on the backplane.