Asus RT-AC56U User Guide - Page 52
Push Button, Client PIN, Start, If the wireless router does not find any WPS devices, it will
View all Asus RT-AC56U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Note: WPS supports authentication using Open System, WPA-Personal, and WPA2-Personal. WPS does not support a wireless network that uses a Shared Key, WPA-Enterprise, WPA2-Enterprise, and RADIUS encryption method. 3. In the WPS Method field, select Push Button or Client PIN code. If you select Push Button, go to step 4. If you select Client PIN code, go to step 5. 4. To set up WPS using the router's WPS button, follow these steps: a. Click Start or press the WPS button found at the rear of the wireless router. b. Press the WPS button on your wireless device. This is normally identified by the WPS logo. Note: Check your wireless device or its user manual for the location of the WPS button. c. The wireless router will scan for any available WPS devices. If the wireless router does not find any WPS devices, it will switch to standby mode. 5. To set up WPS using the Client's PIN code, follow these steps: a. Locate the WPS PIN code on your wireless device's user manual or on the device itself. b.Key in the Client PIN code on the text box. c. Click Start to put your wireless router into WPS survey mode. The router's LED indicators quickly flash three times until the WPS setup is completed. 52