Asus SABERTOOTH Z97 MARK 1 Installation Guide - Page 6

Armor cover B., secure it with the bundled set of four 4 long - motherboard

Get Asus SABERTOOTH Z97 MARK 1 PDF manuals and user guides View all Asus SABERTOOTH Z97 MARK 1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

To install the 35 mm assistant fan on the cover hatch: 1. Locate and remove the screws from the cover hatch (A) then remove the lid from the Thermal Armor cover (B). 2. Get the 35 mm assistant fan and position it to an orientation where its THE ULTIMATE FORCE logo is facing up. 3. Match the four screw holes on the assistant fan with the four screw holes on the cover hatch and secure it with the bundled set of four (4) long screws for the 35 mm assistant fan. The screwdriver is not included in the accessory package. 4. Connect the fan cable connector to the assistant fan (ASST_FAN2) header on the motherboard. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
6
To install the 35 mm assistant fan on the cover hatch:
1.
Locate and remove the screws from the cover
hatch (A) then remove the lid from the Thermal
Armor cover (B).
2.
Get the 35 mm assistant fan and position it to
an orientation where its THE ULTIMATE FORCE
logo is facing up.
3.
Match the four screw holes on the assistant fan
with the four screw holes on the cover hatch and
secure it with the bundled set of four (4) long
screws for the 35 mm assistant fan.
The screwdriver is not included in the accessory
package.
4.
Connect the fan cable connector to the assistant
fan (ASST_FAN2) header on the motherboard.