Asus SP98-N SP98-N - Page 33
Riser Card Connectors
View all Asus SP98-N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
3. H/W SETUP Connectors 3. HARDWARE SETUP 3.8.3 Riser Card Connectors 1) LAN Activity Connectors These connectors support Local Area Network (LAN) cards such as the ASUS PCI-L101 (see 7.1 ASUS PCI-L101 Fast Ethernet Card) with output signals for data transfer activity. The LAN_LED connector allows the front panel LED to flash during transfer activity between the network and the computer. The WOL_CON connector allows the system to power up when there is a wakeup package (signal) received from the network. IMPORTANT: This feature requires that Wake On LAN is set to Enabled (see 4.5.1 Power Up Control) and that your system has an NLX power supply with at least 720mA +5V standby power. ® NLX-R YEONG-YANG NLX-R (Front) + LAN_LED (NLX-R only) Yeong-Yang (Front) +5 Volt Standby Ground PME WOL_CON NLX-R & Yeong-Yang Risers LAN Activity Connectors 2) Front Panel Microphone Connector This connector is used to connect the front panel microphone jack to the motherboard through a ribbon cable. ® NLX-R YEONG-YANG NLX-R (Front) Yeong-Yang (Front) The front panel's 1/8" microphone jack connects to the riser card through a ribbon cable Front Panel Microphone Jack ASUS SP98-N User's Manual 33