Asus SP98-N SP98-N - Page 94
OS/2 V2.1 - korea
View all Asus SP98-N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
6. S/W REFERENCE OS/2 V2.1 6. SOFTWARE REFERENCE GENERAL NOTES FOR THE OS/2 DRIVERS: • The descriptions apply to "SiS 5597/5598 Driver Release V1.03". The descrip- tions, however, are subject to change at anytime without notice. • All OS/2 Warp Versions up to SiS 5597/5598 driver Rev. 1.03 would be in- stalled as described in "7. OS/2 V3.0 (Warp)" except for Double Bytes OS/2 Warp (e.g., Chinese, Japanese, and Korea). •. For Double Bytes OS/2 Warp installation, refer to section 6.11 Double Bytes OS/2 Warp. 6.9 OS/2 V2.1 6.9.1 Driver Files 1. The enclosed SiS 5597/5598 OS/2 2.1 driver contains the following files: SISINST.CMD SiS driver install program SVGA.EXE SiS PMI Generator S768256.DL@ SiS IBMDEV32.DLL Display Driver OTHERS other files required during installation 6.9.2 Installation Before installing the SiS 5597/5598 OS/2 drivers, make sure to: 1. Install your OS/2 system using "VGA display" option (i.e., standard VGA). 2. Start your OS/2 system. Install SiS 5597/5598 OS/2 2.1 drivers as follows: 1. Enter "OS/2 window" or "OS/2 full screen". 2. Change to the directory where the SiS 5597/5598 OS/2 2.1 display drivers are located and type SISINST . For example, A:\OS2\SBCS.21>SISINST 3. All the Driver Files will be copied to a subdirectory C:\SISDRV and the "Select Screen parameters for SiS SVGA" menu appears and all the resolution (and color) and frame rate supported would be shown on the screen. 4. Choose which one you would like to use and click OK. 5. The installation program would then complete all installation process and create a "SiS Setup" for future change mode usage. 6. Shutdown and reboot OS/2 (your settings will only take effect when you reboot OS/2). 94 ASUS SP98-N User's Manual