Asus ST558 Series User Guide - Page 42
Screen menu, Screen
View all Asus ST558 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
40 The OSD (On-Screen Display) menu Screen menu Screen PAP Setting Display Wall Aspect Adjust Screen Freeze Full 2 Off Item PAP Setting (Picture and Picture) Display Wall Aspect :Move Enter :Enter Exit :Exit Description • PAP: Turns on or off the PIP (Picture in Picture) and PBP (Picture by Picture) functions. • Active Picture: For the PIP, selects the main or sub picture to operate. For the PBP, selects the left or right picture to operate. Swaps the main/ sub or left/right pictures. • Picture Size: Changes the size of the sub picture. Notes: • In PIP mode, when the aspect ratio of the sub picture's source signal is 4:3 and its Aspect setting is set to Full 1 or Real, the aspect ratio of the sub picture will be 4:3. • In PBP mode, the aspect ratio of the sub picture is fixed as 16:9 regardless of the Aspect setting. • Picture Position: (PIP only) Changes the position of the sub picture. Notes: • PAP is not available for all signal source combinations. See "Supported PAP input signal combination" on page 60 for more information on supported combinations. • In PAP mode, only sound from the active picture will be available. • H. Monitors/V. Monitors: Sets the number of displays used in the horizontal/vertical direction. • H. Position/V. Position: Sets the horizontal/vertical position of the display wall matrix. • Frame Comp.: Adjusts images near the display edges for optimal demonstration across the display wall. • LED: Turns the power indicator on the display on or off. • Power On Delay: Choose to enable or disable a sequence in turning on the screen matrix. If enabled, the display will turn on with a maximum of 10second delay. Sets the picture's aspect ratio. • Wide Zoom: Enlarges to fill screen with minimum distortion. • Zoom: Enlarges the picture, keeping the same aspect ratio.