Asus T3-M3N8200 User Manual - Page 33

Installing a Serial ATA disk drive

Get Asus T3-M3N8200 PDF manuals and user guides View all Asus T3-M3N8200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

3. Secure the optical drive with four screws on both sides of the bay. 4. Connect the IDE and the power plugs to the connectors at the back of the drive. 3 3 2.9 Installing a Serial ATA disk drive The system supports one Serial ATA hard disk drive. To install a Serial ATA hard disk drive: 1. Connect the SATA power cable to the plug of the power supply unit. 2. Connect the SATA signal cable and the power plugs to the connectors at the back of the drive. 3. Locate the HDD tray. 4. Insert a hard disk drive (with the HDD PCB facing the top of the chassis) to the tray, then secure it with four screws. 5. Connect the SATA signal cable to the SATA connector on the motherboard, and tighten all the cables with the plastic coils. 2 1 4 4 4 4 4 ASUS T-Series M3N8200 2-15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
2-15
ASUS T-Series M3N8200
3
3
3.
Secure the optical drive with four
screws on both sides of the bay.
4.
Connect the IDE and the power
plugs to the connectors at the back
of the drive.
2.9
Installing a Serial ATA disk drive
The system supports one Serial ATA hard disk drive.
To install a Serial ATA hard disk drive:
1.
Connect the SATA power cable to
the plug of the power supply unit.
2.
Connect the SATA signal cable and
the power plugs to the connectors
at the back of the drive.
3.
Locate the HDD tray.
4.
Insert a hard disk drive (with the
HDD PCB facing the top of the
chassis) to the tray, then secure it
with four screws.
5.
Connect the SATA signal cable to the
SATA connector on the motherboard,
and tighten all the cables with the
plastic coils.
1
2
4
4
4
4
4