Asus T4-M3N8200 User Manual - Page 49
ATX power connectors 24-pin EATXPWR, 4-pinATX12V, IDE connector 40-1 pin PRI_IDE
View all Asus T4-M3N8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
3. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) These connectors are for the 24-pin and 4-pin power plugs from the power supply unit. The plugs from the power supply unit are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. Do not forget to connect the 4-pin ATX12V power plug to the ATX12V connector on the motherboard. Otherwise, the system will not boot up. M3N18L EATXPWR ATX12V +3 Volts +3 Volts Ground +5 Volts Ground +5 Volts Ground Power OK +5V Standby +12 Volts +12 Volts +3 Volts +12V DC GND +3 Volts -12 Volts Ground PSON# Ground Ground Ground -5 Volts +5 Volts +5 Volts +5 Volts Ground +12V DC GND R M3N18L ATX Power Connector 4. IDE connector (40-1 pin PRI_IDE) This connector is for an IDE 100/66 signal cable, a blue connector for the primary IDE connector on the motherboard M3N18L R M3N18L IDE Connector PRI_IDE PIN1 NOTE: Orient the red markings (usually zigzag) on the ID ribbon cable to PIN 1. • Pin 20 on the IDE connector is removed to match the covered hole on the Ultra DMA cable connector. This prevents incorrect insertion when you connect the IDE cable. • Use the 80-conductor IDE cable for Ultra DMA 100/66 IDE devices. ASUS T-Series M3N8200 4-