Asus TS300-E7 PS4 TS300-E7/PS4 User Manual - Page 60
Chassis intrusion connector 2-pin CHASSIS, ME firmware force recovery setting 3-pin ME_RECOVERY1
View all Asus TS300-E7 PS4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
7. Chassis intrusion connector (2-pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default , the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. 8. ME firmware force recovery setting (3-pin ME_RECOVERY1) This jumper allows you to quickly recover the Intel Management Engine (ME) firmware when it becomes corrupted. 4-8 Chapter 4: Motherboard information