Asus TS500-E2 User Manual - Page 42
This feature requires an ATX power supply that can supply at least 1A
View all Asus TS500-E2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
4. Keyboard power (3-pin KBPWR1) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. KBPWR1 12 23 +5V (Default) +5VSB NCLV-D2 Series Keyboard power setting 5 . VGA controller setting (3-pin VGA_EN1) These jumpers allow you to enable or disable the onboard ATI® RAGE-XL PCI VGA controller. Set to pins 1-2 to activate the VGA feature. NCLV-D2 Series VGA Setting VGA_EN1 1 2 Enable (Default) 2 3 Disable 2-22 Chapter 2: Hardware information
2-22
2-22
2-22
2-22
2-22
Chapter 2: Hardware information
Chapter 2: Hardware information
Chapter 2: Hardware information
Chapter 2: Hardware information
Chapter 2: Hardware information
4.
4.
4.
4.
4.
Keyboard power (3-pin KBPWR1)
Keyboard power (3-pin KBPWR1)
Keyboard power (3-pin KBPWR1)
Keyboard power (3-pin KBPWR1)
Keyboard power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer
when you press a key on the keyboard (the default is the Space Bar).
This feature requires an ATX power supply that can supply at least 1A
on the +5VSB lead, and a corresponding setting in the BIOS.
5.
5.
5.
5.
5.
VGA controller setting (3-pin VGA_EN1)
VGA controller setting (3-pin VGA_EN1)
VGA controller setting (3-pin VGA_EN1)
VGA controller setting (3-pin VGA_EN1)
VGA controller setting (3-pin VGA_EN1)
These jumpers allow you to enable or disable the onboard ATI
®
RAGE-XL PCI VGA controller. Set to pins 1-2 to activate the VGA
feature.
NCLV-D2 Series Keyboard power setting
KBPWR1
(Default)
+5V
+5VSB
12
23
NCLV-D2 Series VGA Setting
VGA_EN1
Enable
(Default)
Disable
2
3
2
1