Asus TS700-E4 User Manual - Page 62
Secure the drive cage with a screw.
UPC - 610839645985
View all Asus TS700-E4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
To reinstall a floppy disk drive: 1. Position the floppy drive vertically with the eject button on the left side (close to the HDDs). 2. Connect the drive signal cable and power cable. Floppy drive power cable Floppy drive signal cable Red stripe to match Pin 1 on the connector 3. Carefully push the drive into the bay until the drive cage fits the front edge of the bay. 4. Secure the drive cage with a screw. 2-42 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-42
To reinstall a floppy disk drive:
1.
Position the floppy drive vertically
with the eject button on the left side
(close to the HDDs).
2.
Connect the drive signal cable and
power cable.
4.
Secure the drive cage with a screw.
3.
Carefully push the drive into the
bay until the drive cage fits the front
edge of the bay.
Floppy drive power cable
Floppy drive signal cable
Red stripe to match Pin 1 on the connector