Asus TS700-E8-RS8 User Guide - Page 42
Installing a 2.5-inch hard disk drive (TS700-E8-RS8 only), metal beam.
View all Asus TS700-E8-RS8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
6. Push the tray lever until it clicks, and secures the drive tray in place. The drive tray is correctly placed when its front edge aligns with the bay edge. 7. Repeat steps 1 to 6 if you wish to install a second SATA/SAS drive. 2.5.5 Installing a 2.5-inch hard disk drive (TS700-E8-RS8 only) The system comes with two hot-swap 2.5-inch hard disk drives on the rear panel for mounting SATA/SAS or SSD hard disk drives. To install a 2.5-inch hard disk drive: 1. Release a drive tray by pushing the spring lock to the right, and then pulling the tray lever outward. The drive tray ejects slightly after you pull out the lever. 2. Firmly hold the tray lever and pull the drive tray out of the bay. When the drive tray is out, its case is facing downwards. 3. Place the drive tray on a flat surface. 4. Release the screws on each side of the drive tray to release the drive tray metal beam. 5. Find the hard disk drive you want to install and its bundled screws. Support beam 2-18 Chapter 2: Hardware setup