Asus TS700-E8-RS8 User Guide - Page 76
RAID selection jumper setting 3-pin RAID_SEL1, ME firmware force recovery setting 3-pin ME_RCVR1
![]() |
View all Asus TS700-E8-RS8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
4. RAID selection jumper setting (3-pin RAID_SEL1) This jumper allows you to select the PCH SATA RAID mode to use LSI MegaRAID software or Intel® Rapid Storage Technology enterprise 3.0 RAID. Place the jumper caps over pins 1-2 if you want to use the LSI MegaRAID software RAID Utility (default); otherwise, place the jumper caps to pins 2-3 to use the Intel® Rapid Storage Technology Enterprise Option ROM Utility. 5. ME firmware force recovery setting (3-pin ME_RCVR1) This jumper allows you to force Intel Management Engine (ME) boot from recovery mode when ME become corrupted. 4-16 Chapter 4: Motherboard information
![](/manual_guide/products/asus-ts700e8rs8-user-guide-0d3b9fc/76.png)
Chapter 4: Motherboard information
4-16
4.
RAID selection jumper setting (3-pin RAID_SEL1)
This jumper allows you to select the PCH SATA RAID mode to use LSI MegaRAID
software or Intel
®
Rapid Storage Technology enterprise 3.0 RAID. Place the jumper
caps over pins 1–2 if you want to use the LSI MegaRAID software RAID Utility (default);
otherwise, place the jumper caps to pins 2–3 to use the Intel
®
Rapid Storage Technology
Enterprise Option ROM Utility.
5.
ME firmware force recovery setting (3-pin ME_RCVR1)
This jumper allows you to force Intel Management Engine (ME) boot from recovery mode
when ME become corrupted.