Asus TUF GAMING B450M-PRO S Users Manual English - Page 11

Product introduction 1 1.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. 1.2 • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity. • Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. Motherboard overview 5 4 15 1 4 24.4cm(9.6in) 10 2 KBMS _USB78 U32G1_3-6 EATX12V DIGI+ VRM 18 BIOS_FLBK FLBK_LED1 RGB_HEADER1 CPU_OPT CPU_FAN BOOT VGA CPU DRAM 17 TUF GAMING B450M-PRO S DDR4 DIMM_A1 (64bit, 288-pin module) DDR4 DIMM_A2* (64bit, 288-pin module) DDR4 DIMM_B1 (64bit, 288-pin module) DDR4 DIMM_B2* (64bit, 288-pin module) SOCKET AM4 EATXPWR Place this HDMI_DP side towards the rear of the 5 chassis U32G2_C2 24.4cm(9.6in) LAN_U32G2_1 RTL 8125B-CG BATTERY U32G1_12 CHA_FAN1 AUDIO 256Mb BIOS 8 SPI TPM 6 PCIEX1 2280 2260 2242 M.2_1(SOCKET3) M.2_2(SOCKET3) 3 Super I/O PCIEX16_1 22110 2280 2260 2242 6 AMD B450 14 AAFP PCIEX16_2 COM_DEBUG COM USB910 RGB_HEADER2 SPEAKER USB1112 CHA_FAN2 F_PANEL CLRTC SATA6G_4 SATA6G_3 SATA6G_2 SATA6G_1 11 13 12 9 10 4 16 7 Unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components. ASUS TUF GAMING B450M-PRO S 1-1