Asus TUF GAMING B660-PLUS WIFI D4 Users Manual English - Page 13

6. M.2 slots (Key M) The M.2 slots allow you to install M.2 devices such as M.2 SSD modules. • M.2_1 slot (Key M), type 2242/2260/2280/22110 (supports PCIe 4.0 X4) • M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 X2) • M.2_3 slot (Key M), type 2242/2260/2280/22110 (supports PCIe 4.0 X4) • To enable Intel® Optane™ Memory (Hybrid Storage device), it must be installed in PCH-attached slots with Intel® Rapid Storage Technology. 7. SATA 6Gb/s ports The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and hard disk drives via SATA cables. 8. USB 3.2 Gen 2 connector (supports USB Type-C®) SBU2 VBUS The USB 3.2 Gen 2 header (USB Type-C®) allows you to connect a SBU1 CC1 TX2+ TX2- USB 3.2 Gen 2 module for an additional USB 3.2 Gen 2 Type-C® port. VBUS RX1RX1+ GND RX2+ RX2- The header provides a data transfer speed of up to 10 Gb/s. GND TX1- GND D- TX1+ D+ VBUS CC2 9. USB 3.2 Gen 1 header The USB 3.2 Gen 1 header allows you to connect a USB 3.2 Gen 1 module for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1 header provides data transfer speeds of up to 5 Gb/s. The USB 3.2 Gen 1 module is purchased separately. USB3+5V IntA_P2_SSRXIntA_P2_SSRX+ GND IntA_P2_SSTXIntA_P2_SSTX+ GND IntA_P2_DIntA_P2_D+ PIN 1 USB3+5V IntA_P1_SSRXIntA_P1_SSRX+ GND IntA_P1_SSTXIntA_P1_SSTX+ GND IntA_P1_DIntA_P1_D+ GND USB+5V USB_P9USB_P9+ GND NC 10. USB 2.0 headers The USB 2.0 headers allow you to connect a USB module for additional USB 2.0 ports. The USB 2.0 headers provide data transfer speeds of up to 480 Mb/s. DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! PIN 1 The USB 2.0 module is purchased separately. USB+5V USB_P10USB_P10+ GND 11. AURA Addressable Gen 2 headers ADD_GEN 2 +5V Data Ground The Addressable Gen 2 headers allow you to connect individually addressable PIN 1 RGB WS2812B LED strips or WS2812B based LED strips. The Addressable Gen 2 headers support WS2812B addressable RGB LED strips (5V/Data/ Ground), with a maximum power rating of 3A (5V), and the addressable headers on this board can handle a combined maximum of 500 LEDs. Before you install or remove any component, ensure that the power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. • Actual lighting and color will vary with LED strip. ASUS TUF GAMING B660-PLUS WIFI D4 1-3