Asus TUF GAMING B760M-PLUS WIFI Users Manual English - Page 13

Expansion slots, Fan headers, Power connectors, M.2 slots Key M, SATA 6Gb/s ports

Page 13 highlights

3. Expansion slots This motherboard supports two PCIe x16 graphics cards and one PCIe 4.0 x1 network cards, SCSI cards or other cards that comply with the PCI Express specification. FAN PWM FAN IN FAN PWR GND GND FAN PWR FAN IN FAN PWM 4. Fan headers The Fan headers allow you to connect fans to cool the system. Header CPU_FAN CPU_OPT CHA_FAN1 CHA_FAN2 CHA_FAN3 AIO_PUMP Max. Current 1A 1A 1A 1A 1A 1A Max. Power 12W 12W 12W 12W 12W 12W Default Speed Q-Fan Controlled Q-Fan Controlled Q-Fan Controlled Q-Fan Controlled Q-Fan Controlled Full-Speed Shared Control A A - FAN PWM FAN IN FAN PWR GND 5. Power connectors These Power connectors allow you to connect your motherboard to a power supply. The power supply plugs are designed to fit in only one orientation. Find the proper orientation and push down firmly until the power supply plugs are fully inserted. Ensure to connect the 8-pin power plug or connect both the 8-pin and 4-pin power plugs. • We recommend that you use a PSU with a higher power output when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. • If you want to use two high-end PCI Express x16 cards, use a PSU with 1000W power or above to ensure the system stability. 6. M.2 slots (Key M) The M.2 slots allow you to install M.2 devices such as M.2 SSD modules. • Intel® 13th & 12th Gen Processors M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode) • Intel® B760 Chipset M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode) The M.2 SSD module is purchased separately. 7. SATA 6Gb/s ports The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and hard disk drives via SATA cables. 8. USB 3.2 Gen 2 Type-C® Front Panel connector NC VBUS NC TX2+ The USB 3.2 Gen 2 Type-C® connector allows you to connect a USB CC1 VBUS TX2GND 3.2 Gen 2 Type-C® module for an additional USB 3.2 Gen 2 Type-C® RX1RX1+ RX2+ RX2- port on the front panel. The USB 3.2 Gen 2 Type-C® connector provides GND GND TX1- D- data transfer speeds of up to 10 Gb/s. TX1+ D+ VBUS CC2 The USB 3.2 Gen 2 Type-C® module is purchased separately. TUF GAMING B760M-PLUS WIFI 1-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

1-3
3. Expansion slots
This motherboard supports two PCIe x16 graphics cards and one PCIe 4.0 x1 network cards,
SCSI cards or other cards that comply with the PCI Express specification.
4. Fan headers
The Fan headers allow you to connect fans to cool the system.
Header
Max.
Current
Max. Power
Default Speed
Shared
Control
CPU_FAN
1A
12W
Q-Fan Controlled
A
CPU_OPT
1A
12W
Q-Fan Controlled
A
CHA_FAN1
1A
12W
Q-Fan Controlled
-
CHA_FAN2
1A
12W
Q-Fan Controlled
-
CHA_FAN3
1A
12W
Q-Fan Controlled
-
AIO_PUMP
1A
12W
Full-Speed
-
5. Power connectors
These Power connectors allow you to connect your motherboard to a power supply. The
power supply plugs are designed to fit in only one orientation. Find the proper orientation and
push down firmly until the power supply plugs are fully inserted.
Ensure to connect the 8-pin power plug or connect both the 8-pin and 4-pin power plugs.
We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
If you want to use two high-end PCI Express x16 cards, use a PSU with 1000W power
or above to ensure the system stability.
6.
M.2 slots (Key M)
The M.2 slots allow you to install M.2 devices such as M.2 SSD modules.
Intel
®
13
th
& 12
th
Gen Processors
M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)
Intel
®
B760 Chipset
M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)
The M.2 SSD module is purchased separately.
7. SATA 6Gb/s ports
The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and
hard disk drives via SATA cables.
8.
USB 3.2 Gen 2 Type-C
®
Front Panel connector
The USB 3.2 Gen 2 Type-C
®
connector allows you to connect a USB
3.2 Gen 2 Type-C
®
module for an additional USB 3.2 Gen 2 Type-C
®
port on the front panel. The USB 3.2 Gen 2 Type-C
®
connector provides
data transfer speeds of up to 10 Gb/s.
The USB 3.2 Gen 2 Type-C
®
module is purchased separately.
FAN PWM
FAN IN
FAN PWR
GND
GND
FAN PWR
FAN IN
FAN PWM
NC
NC
CC1
VBUS
RX1-
RX1+
GND
TX1-
TX1+
VBUS
VBUS
TX2+
TX2-
GND
RX2+
RX2-
GND
D-
D+
CC2
TUF GAMING B760M-PLUS WIFI