Asus Terminator A7VT Terminator A7VT User Manual - Page 79
Chipset configuration
View all Asus Terminator A7VT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
5.4.3 Chipset configuration The items in this menu show the chipset configuration settings. Select an item then press to display a pop-up menu with the configuration options. Chipset AGP Display Switch [Auto] Init Display First [PCI slot] AGP Bridge Configuration Select Menu Item Specific Help AGP Display Switch [Auto] Select [Auto] to boot from the AGP card first. Select [Onchip AGP] to boot from the Onboard VGA even if there is an AGP card. Configuration options: [Auto] [Onchip AGP] Init Display First [Auto] Allows you to set which graphics controller to use as the primary boot device. Configuration options: [PCI slot] [AGP] AGP Bridge Configuration This sub-menu allows you to set the values for the following items: Graphics Aperture Size [64MB] Allows you to select the size of mapped memory for AGP graphic data. Configuration options: [1G] [512M] [256M] [128M] [64M] [32M] [16M] [8M] [4M] AGP Mode [4X] When set to [4X], this item allows 1066 MB/s video data transfers through the AGP 4X interface card. When set to [1X], the AGP interface only provides a peak data throughput of 266 MB/s even if you are using an AGP 4X card. Configuration options: [1X] [2X] [4X] ASUS Terminator 1 A7VT barebone system 79