Asus V2-AH2 Quick Installation Guide - Page 6
Installing an expansion card, Installing a DIMM
View all Asus V2-AH2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
English Installing a DIMM 1. Locate the DIMM sockets in the motherboard. 2. Unlock a DIMM socket by pressing the retaining clips outward. 3. Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket. 4. Push the DIMM to the socket until the retaining clips snap inward. • Unplug the power supply before adding or removing DIMMs. Failure to do so may cause damage to the motherboard and/or components. • A DDR2 DIMM is keyed with a notch so that it fits in only one direction. Do not force a DIMM into a socket to avoid damaging the DIMM. Installing an expansion card 1. Remove the metal bracket lock. 2. Remove the metal cover opposite the slot that you intend to use. 2 1 3. Insert the card connector to the slot, then press the card firmly until it fits in place. 4. Replace the metal bracket lock. 3 4 Quick installation guide