Asus WiFi-b User Guide - Page 32

Broadband connection that is always

Page 32 highlights

Direct internet connection To enable ICS if your computer directly connects to the Internet: 1. Select the number of IP address assigned by your Internet Service Provider (ISP). Click Next. The wizard will instruct you to enable ICS or create a network bridge if you are assigned two or more IP addresses. 2. The setup wizard automatically selects your broadband network connection. Check Enable Firewall to secure your network from unauthorized access. Click Next. 3. Refer to instructions 2 to 10 of the previous section to enable ICS. 3.3.2 Broadband connection that is always on To enable ICS if you have an existing broadband network that is always on (DSL, cable modem, or LAN): 1. Select whether your computer directly connects to the Internet or through another computer or residential gateway. Click Next. 3-14 ASUS WiFi-b™ Card

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

3-14
ASUS WiFi-b
Card
2.
The setup wizard automatically
selects your broadband network
connection. Check
Enable Firewall
to secure your network from
unauthorized access. Click
Next
.
3.
Refer to instructions 2 to 10 of the
previous section to enable ICS.
3.3.2
Broadband connection that is always on
To enable ICS if you have an existing broadband network that is always on (DSL,
cable modem, or LAN):
1.
Select whether your computer directly
connects to the Internet or through
another computer or residential
gateway. Click
Next
.
Direct internet connection
To enable ICS if your computer directly connects to the Internet:
1.
Select the number of IP address
assigned by your Internet Service
Provider (ISP). Click
Next
.
The wizard will instruct you to enable
ICS or create a network bridge if you
are assigned two or more IP
addresses.