Asus Z11PR-D16 User Manual - Page 25
heatsink until it clicks firmly in place C., and then install the CPU Carrier into
![]() |
View all Asus Z11PR-D16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
3. Align the triangle mark on the CPU with the triangle mark on the CPU Carrier (A), then install the CPU into the CPU Carrier until it clicks firmly into place (B), and then install the CPU Carrier into the heatsink until it clicks firmly in place (C). Ensure that the triangle mark on the CPU matches the triangle mark on the CPU Carrier. 2 CPU Carrier Triangle mark CPU 4. Align the CPU and CPU Carrier in the correct orientation, and then place the heatsinks on top of the CPU sockets. The CPU and CPU Carrier fits in only one correct orientation. DO NOT force the CPU and CPU Carrier into the socket to prevent damaging the CPU pins on the socket. 5. Twist each of the four screws with a screwdriver just enough to attach the heatsink to the motherboard. When the four screws are attached, tighten them one by one in a diagonal sequence to completely secure the heatsink. The heatsink screws are T30 models. A torque value of 12 inch-lbf is recommended. Z11PR-D16 2-7
![](/manual_guide/products/asus-z11prd16-user-manual-04728f9/25.png)