Asus Z11PR-D16 User Manual - Page 86
PCH sSATA Configuration, USB Configuration, Port 1-8, Trunk Clock Gating BTCG [Enabled]
![]() |
View all Asus Z11PR-D16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
SATA Port 1-8 Port 1-8 Allows you to enable or disable the SATA port. Configuration options: [Disabled] [Enabled] PCH sSATA Configuration sSATA Controller [Enabled] Allows you to enable or disable the sSATA Controller. Configuration options: [Disabled] [Enabled] Configure sSATA as [AHCI] Allows you to identify the SATA port connected to Solid State Drive or Hard Disk Drive. Configuration options: [IDE] [AHCI] [RAID] Support Aggressive Link Power Management [Enabled] Allows you to enable or disable the Support Aggressive Link Power (SALP) Management. Configuration options: [Disabled] [Enabled] sSATA Port 1-3 Port 1-3 Allows you to enable or disable the SATA port. Configuration options: [Disabled] [Enabled] USB Configuration USB Precondition [Disabled] Allows you to enable or disable precondition work on USB host controller and root ports for faster enumeration. Configuration options: [Disabled] [Enabled] XHCI Manual Mode [Disabled] This option is used by validation. Configuration options: [Disabled] [Enabled] The following items appears only when the XHCI Manual Mode is set to [Enabled]. Trunk Clock Gating (BTCG) [Enabled] Allows you to enable or disable BTCG. Configuration options: [Disabled] [Enabled] Enable USB 3.0 pins [Disable all pins] Allows you to enable or disable USB 3.0 pins or on a per pin basis. Configuration options: [Select Per-Pin] [Disable all pins] [Enable all pins] USB Per-Connector Disable [Disabled] Allows you to enable or disable each of the USB physical connectors. Once a connector is disabled, any USB devices plugged into the connector will not be detected by BIOS or OS. Configuration options: [Disabled] [Enabled] 4-26 Chapter 4: BIOS Setup
![](/manual_guide/products/asus-z11prd16-user-manual-04728f9/86.png)