Asus Z170-P D3 User Guide - Page 28
Front panel audio connector 10-1 pin AAFP, Digital audio connector 4-1 pin SPDIF_OUT
![]() |
View all Asus Z170-P D3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
5. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. AGND NC SENSE1_RETUR SENSE2_RETUR AGND NC NC NC AAFP PIN 1 Z170-P D3 MIC2 MICPWR Line out_R NC Line out_L PORT1 L PORT1 R PORT2 R SENSE_SEND PORT2 L HD-audio-compliant pin definition Z170-P D3 Front panel audio connector Legacy AC'97 compliant definition • We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high-definition audio capability. • If you want to connect a high-definition front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD]. If you want to connect an AC'97 front panel audio module to this connector, set the item to [AC97]. By default, this connector is set to [HD]. See section 2.6.7 Onboard Devices Configuration for details. 6. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. +5V SPDIFOUT GND Z170-P D3 PIN 1 SPDIF_OUT Z170-P D3 Digital audio connector 1-18 Chapter 1: Product introduction
![](/manual_guide/products/asus-z170p-d3-user-guide-20b34b6/28.png)