Asus Z97-PROWi-Fi ac/USB 3.1 Z97-PROWi-Fi acUSB 31 Users Manual English - Page 50
Internal connectors, Intel, Z97 Serial ATA 6 Gb/s connectors 7-pin SATA6G_12, SATA6G_34
View all Asus Z97-PROWi-Fi ac/USB 3.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
1.2.9 Internal connectors 1. Intel® Z97 Serial ATA 6 Gb/s connectors (7-pin SATA6G_12, SATA6G_34, SATA6G_56/ SATAEXPRESS) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z97 chipset. Chapter 1 • These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. Refer to section 3.6.4 SATA Configuration for details. • Before creating a RAID set, refer to section 5.1 RAID configurations or the manual bundled in the motherboard support DVD. • The M.2 Socket 3 and SATAEXPRESS connectors share the same PCIe x2 bandwidth. When you use both connectors, the BIOS automatically detects the devices connected to these connectors and set a higher priority to SATAEXPRESS than M.2 Socket 3 interface. Refer to section 3.6.4 PCH Storage Configuration of this user guide for more details. • The SATAEXPRESS connector can support one SATA Express device or two SATA devices. 1-34 Chapter 1: Product introduction