Asus Z9NA-D6C User Guide - Page 157
mkdir /mnt/driver, mount /dev/fd0 /mnt/driver, sh replace_ahci.sh, reboot
View all Asus Z9NA-D6C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
5. When asked if you will load additional RAID controller drivers, select No, then press . More Driver Disks? Do you wish to load any more driver disks? Yes No 6. Follow the onscreen instructions to finish the OS installation. 7. When the installation is completed, DO NOT click Reboot. Press + + to switch to the command-line interface from graphic user interface. 8. Type the following commands when using a Legacy floppy. mkdir /mnt/driver mount /dev/fd0 /mnt/driver cd /mnt/driver sh replace_ahci.sh reboot ASUS Z9NA-D6 6-9
ASUS Z9NA-D6
6-9
5.
When asked if you will load additional RAID controller drivers, select
No
, then
press <Enter>.
More Driver Disks?
Do you wish to load any more
driver disks?
Yes
No
6.
Follow the onscreen instructions to finish the OS installation.
7.
When the installation is completed, DO NOT click
Reboot
. Press <Ctrl>
+ <Alt> + <F2> to switch to the command-line interface from graphic user
interface.
8.
Type the following commands when using a Legacy floppy.
mkdir /mnt/driver
mount /dev/fd0 /mnt/driver
cd /mnt/driver
sh replace_ahci.sh
reboot