Asus Z9NH-D12 Z9NH-D12 Series User Manual - Page 123
Using New Configuration, Configure > New Configuration
View all Asus Z9NH-D12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Using New Configuration When a RAID set already exists, using the New Configuration command erases the existing RAID configuration data. If you do not want to delete the existing RAID set, use the View/Add Configuration command to view or create another RAID configuration. To create a RAID set using the New Configuration option 1. From the Management Menu, select Configure > New Configuration, and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Configuration Menu Easy Configuration Management MenuNew Configuration Configure View/Add Configuration Initialize Clear Configuration Objects Select Boot Drive Rebuild Check Consistency Clear Existing Configuration And Start A New Configuration Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option 2. Follow step 2 to 9 of the previous section: Using Easy Configuration. 3. Select Size from the Virtual Drive menu, and then press . 4. Key-in the desired virtual drive size, and then press . LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010 BIOS Version A.10.09231523R Virtual Drive(s) Configured ManagemeLnDt MenuERaAsIyD ConfSigzueration -#SAtRrRiApYesSELECTSItOrNipMSEzNU CIonniftiigaulriez0e Objects 1 148.580GB PORT #2 0 ONLIN A00-00 64KB Rebuild 1 ONLIN A00-01 Check ConsEinstteernVcViyDrtSuiazle:D1r5i2v12e460_READY RAID = 1 Units= MB 3 READY Size = 152146MB DWC = OFF RA = On Accept SPAN = NO Status ONLINE Enter VD Size: Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option 5. Follow step 10 to 14 of the previous section: Using Easy Configuration to create the RAID set. ASUS Z9NH-D12 Series 5-11