Asus p4p800s P4P800S user's manual English version E1398 - Page 52
IDE Detect Time Out [35]
View all Asus p4p800s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Refer to the section "Parallel ATA and Serial ATA device configurations" on page 1-22 for the appropriate settings of the IDE Configuration items under different operating systems. Enhanced Mode Support On [S-ATA] The default setting S-ATA allows you to use native OS (Windows 2000/XP) on Serial ATA and Parallel ATA ports. We recommend that you do not change the default setting for better OS compatibility. In this setting, you may use legacy OS (Windows ME/98/98SE/NT4.0) on the Parallel ATA ports only if you did not install any Serial ATA device. The P-ATA+S-ATA and P-ATA options are for advanced users only. If you set to any of these options and encounter problems, revert to the default setting S-ATA. Configuration options: [P-ATA+S-ATA] [S-ATA] [P-ATA] The Enhanced Mode Support On appears only when the item Onboard IDE Operate Mode is set to Enhanced Mode. IDE Port Settings [Primary P-ATA+S-ATA] Allows selection of the IDE ports to activate if you are using a legacy operating system. Set to [Primary P-ATA+S-ATA] if you wish to use the primary Parallel ATA and Serial ATA ports, or set to [Secondary P-ATA+SATA] to enable the secondary P-ATA port instead. Setting to [P-ATA Ports Only] disables the two Serial ATA ports supported by ICH5. Configuration options: [Primary P-ATA+SATA] [Secondary P-ATA+S-ATA] [P-ATA Ports Only] The IDE Port Settings appears only when the item Onboard IDE Operate Mode is set to Compatible Mode. IDE Detect Time Out [35] Selects the time out value for detecting ATA/ATAPI devices. Configuration options: [0] [5] [10] [15] [20] [25] [30] [35] 2-14 Chapter 2: BIOS information