Audiovox 1680 User Manual - Page 47
If you are unable to solve the problems using
UPC - 044476741456
View all Audiovox 1680 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
12 12. Troubleshooting Whenever there is a problem with your DVD Player, please check the following table before sending the DVD Player for service. If you are unable to solve the problems using this table, contact your dealer for service. Problems Causes Troubleshooting No power Bad power source Check power cord and power source Cover unable to close Disc placed incorrectly Replace the disc properly Unable to play Power is OFF Turn the power ON No disc inside Insert a disc Disc placed up-side-down Put the disc in the correct position Dirty disc Clean the disc Disc deformed Replace the disc Condensation on DVD Player Turn the power ON and wait 1-2 hours before trying again Blurred screen with mosaique Poor disc quality Replace the disc No sound Playback speed changed Push Play to resume normal playback Bad contact on audio cable Check the audio cable TV volume is too low Adjust the TV volume Audio output setup error Check audio output settings No picture Video cable not connected Check video cable Video component input setup error Check video component input setup Signal IN/OUT setup error Check IN/OUT switch position Remote Control Failure No battery in remote control Install new battery Battery is discharged Replace new battery Remote control does not aimed the Aim remote control at the sensor of the sensor of the DVD Player DVD Player Unable to playback a selected Classified by Parental level program Check level password or reset the parental level Sound or subtitle and initial setup A selected language is not included Select other language with sound/subtitle in the disc keys Not the selected OSD language Screen language setup error Unable to change sound/subtitle Disc contains only one language Front panel control failure Hold switch is in the locked position Check the OSD language setting in the system setup Check disc contents Move the hold switch to the unlocked position 46