Audiovox AWD210 Owners Manual - Page 6

Powering the Transmitter The 2.4GHz wireless transmitter runs on regular AC power or on 3 AAA batteries (included), so you can plug it in or install the batteries and take it with you. The choice is yours. Transmitter (back panel) LINE IN DC IN LINK ON/OFF AC power adapter To plug in the transmitter: 1. Connect the AC power adapter to the DC IN power supply jack on the transmitter's back panel. 2. Plug the adapter into an electrical outlet. Important: This power unit is intended to be correctly oriented in a vertical or floor mount position. Transmitter (bottom) To install batteries in the transmitter: 1. Locate the battery compartment on the bottom of the transmitter. Push the compartment door in the direction of the arrow to open the compartment. 2. Insert the three AAA batteries provided. The compartment is marked to show how the batteries should be oriented. Make sure to follow these markings, with the + and - ends in the correct positions. 3. Replace the battery compartment cover. Important: Do not mix batteries with different chemistry types (for example, a zinc battery with an alkaline battery). Do not mix new and used batteries. Do not leave batteries installed in the product when not in use for long periods. Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in accordance with Local and National Regulations. Note: The transmitter does not recharge batteries.