Audiovox AWD210 Owners Manual - Page 8

Using your Headphones LINE IN DC IN LINK ON/OFF 1. Move the ON/OFF switch on the back of the transmitter to the ON position to turn the transmitter on. power button 2. Press the power button on the left headphone to turn the headphones on. 3. Switch on the audio source (TV, DVD, CD player, etc.) to which the transmitter is connected. If your audio source is a DVD or CD player, start a disc. 4. Simultaneously press the link buttons on the headphones and on the back of the transmitter. The headphones and transmitter lock onto each other for wireless transmission. The LED on the headphones flashes while the devices are tuning; it stays on once the devices are tuned. 5. Adjust the volume using the volume up and down buttons on the left earphone. Turning the Headphones Off power button To turn the headphones off: Press and hold the power button on the headphones for 2 seconds. Don't forget to switch off the transmitter too! To make sure that your headphones are ready to use at all times, plug them in when you're not using them so that they can recharge. Resetting the Headphones Reset button If you ever want to return the headphones to their factory presets, simply reset the headphones by triggering the reset button on the left headphone with a paper clip.