Audiovox D1020 Operating Instructions - Page 13
Wiring Diagram - power adapter
UPC - 044476018718
View all Audiovox D1020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Wiring Diagram (Power Adapter With Built-in Wireless FM Modulator) AUDIO L/R INPUT This power adapter has a built-in wireless FM Modulator. The FM modulator is designed to transmit the audio from your DVD player to your vehicle radio. The channel select switch is used to select the modulator frequency (88.1MHz, 88.3MHZ, 88.5MHz and 88.7MHz). The vehicle radio must be tuned to the same frequency that is selected on the wireless FM modulator. Installation: 1) Plug the Power Adapter into the 12 VDC outlet in the vehicle. 2) Connect the 3.5mm audio jack to the audio output jack on the rear of the DVD player. 3) Connect the DC jack to the 9 VDC input on the side of the DVD player. 4) Tune the vehicle radio to the same frequency that is selected on the modulator. NOTE: For best performance, use a radio frequency that is not in use in your local area. 12