Audiovox D2010 Owners Manual - Page 30

Troubleshooting Symptom The player cannot play. There is no sound. There is no picture. Poor AV performance. How To Check • Make sure the AV IN/OUT switch on the right side of the player unit is in the OUT position for standard play. • Make sure the disc door is completely closed. • Make sure a disc is loaded. • Make sure the disc is loaded with label side up. • Disc should be clean, not dirty or warped. • Player's region code should be the same as the region code of the DVD disc. • Make sure water condensation has not occurred? If it has, remove the disc and keep the player power on until the moisture evaporates. • Make sure the system connection is correct. • Make sure the sound setup of DVD disc is correct. • Is your disc dirty or warped? Clean or replace it. • If wired headphones are plugged in, unplug them. • Make sure TV is turned on and in correct video mode. • Make sure your system connection is correct. • Is your disc dirty or warped? Clean or replace it. Cannot continue to play and play a section repeatedly. • Make sure the player is not in A-B repeat mode. • Press A-B button to cancel A-B repeat status. • Is your disc dirty or warped? Clean or replace it. The remote control does not work. • Make sure there is no obstruction between the remote control and the player. • Make sure you are pointing the remote control towards the player. • Make sure battery is inserted correctly (check polarity). • Replace weak battery. WARNING: Do not touch any metal objects to the Battery connectors, as it will put the Battery in standby mode. To exit the standby mode, connect the Battery and DVD Player to AC or DC power. Other possibilities: Static or other external interference may cause the player to function abnormally. Unplug the power-supply cord from the outlet and plug it in again to reset the player so that normal operation can resume. If you are still having problems, then disconnect the power to the DVD Player and consult a qualified technician. - 29 -