Audiovox DT102 Operation Manual - Page 13

Playback Preparations Pre-Operation Using Wired Headphones 1. Connect the DVD Player to the desired power Adapter or battery. 2. Press the "POWER" button for one second. 3. Load a disc with the label facing towards the front. Push the disc in about ¾ of the the way and the disc will be pulled into the Player automatically. 4. The disc will load and automatically begin Playback. 1. Connect any set of standard headphones that have a 1/8 jack to the headphone jack on the left side of DT102. 2. Adjust the volume to the desired level Note: Connecting the headphones will disconnect the internal speakers. Using Optional Wireless Headphones Part Number MVIRHS IR Switch 30° 30° 1. For best results when using wireless headphones, sit facing the screen within 12 feet and at angles of no more than 30 degrees from center. There should be no obstacles between wireless headphones and the infrared audio transmitter. 2. Set the IRT switch located on the left side of the DT102 to ON. 3. If there is no sound: A) Make sure the batteries in the headphones are not discharged. B Make sure the IR headphones are ON and the volume is turned up. C) Make sure the IRT ON/OFF switch is set to ON. 13