Audiovox DT102 Operation Manual - Page 7

System Controls and Connections Left Side Controls and Connections 1 2 3 2 45 AUDIO IN/OUT VIDEO IN/OUT GAME PORT IN OUT AV ON OFF IRT DC 9V 1. Headphone Jack - Used to connect wired headphones. The sound from the speakers will be automatically cut off when the headphones are connected. 2. AV In/Out Switch Input Mode When the AV In/Out switch is set to IN* the unit is ready to accept an auxiliary audio/video signal or game input via the audio video inputs or game port input**. *Note: The A/V input and game port jack are auto-switching. Even though the switch is set to IN it will only be active when a A/V source or game controller is connected. When an auxiliary A/V signal is input the OSD will display "AUX". When a game controller is connected the OSD will display "Games" Connect an external A/V Source using the supplied A/V adapter cable to the A/V input jacks. The source can be any external A/V device (i.e. Camcorder, digital camera video game etc) Output Mode This output will provide an audio/video signal that duplicates the signal displayed on the DT102. This can be used to connect the DT102 to another monitor or amplifier. 3. Game Port - Connect the optional game controller (GMCT) to this input to play a variety of video games. 4. IR Transmitter On/Off Switch - Used to turn the IR Transmitter on or off. When operating the player with the battery if wireless headphones are not being used set this switch to the Off position to increase the playback time. 5. 9V DC Input Jack - Used to connect power from either the supplied AC to DC adapter or the vehicle power adapter. Right Side Panel Controls and Connections 1 2 1. Rear DVD Disc Slot - for loading and removing discs. 2. Built-in Stand - for desktop use when the battery is not being used. 7