Audiovox DTT7810FM Operation Manual - Page 5

Main Features Front Panel Controls 3 2 1 WARNING ! TO AVOID POSSIBLE DAMAGE TO THIS DEVICE. DO NOT TOUCH CONNECTOR PINS WITH METAL OBJECT WHILE POWER ON. 4 POWER BASS BOOST AM/FM ALARM OFF SLEEP DIMMER SNOOZE 5 6 7 8 9 10 11 12 131415 16 17 18 19 1. Release Button - Press this button to release the shuttle unit. 2. 24 pin Shuttle Interface Connector - Used to connect the shuttle to the DTT7810FM. 3. Speakers for Shuttle Models DT102, DT85 and Dt7. 4. Power Button - To turn the DTT7810 FM (ON/OFF) 5. Volume Up / Down Button - Used to increase and decrease the volume level. 6. Channel Up / Down Button - Used to go to the next channel Up or Down. 7. Source Button - Select from the four (4) available sources. DVD > TV > AV > RADIO 8. Bass Boost Button - Used to increase the low frequency (bass) response. 9. Alarm Off Button - Used to turn off the alarm. The alarm will automatically turn off after one minute 10. Sleep Button - Used to set the DTT7810 sleep mode. The unit will turn OFF in 15, 30, 45, 60, 90, or 120 minutes. 11. Dimmer - Used to control the brightness of the LCD display. 12. Snooze - Used to reset the alarm function for 9 minutes. 13. LCD Display Window - The LCD display is used to show the Time, Source selected, and Radio Station. 14. IR Receiver - Allows remote control of the DTT7810 and the installed shuttle (DT102, Dt85 or DT7). 15. Store Button - Used to set the AM/FM presets into memory. 16. Radio Tune / Clock Set - In Standby mode these buttons are used for setting hours, minutes, and to select from 12 and 24 hour mode. - In operation mode these buttons are used for radio tuning Up and Down. 17. Clock Mode Button - Used to select the clock or alarm item to be set. 18. Recall Button - Used to recall the radio display and select preset stations. 19. AM / FM Button - Radio Band selector. (FM1, FM2 and AM) 3