Audiovox DV5007 Owners Manual - Page 12

Setup or Component video outputs (DVD) Some TVs or monitors are equipped with component video inputs. Using the Audio cable (not supplied), connect the left/right AUDIO OUT jacks on your Unit to the left/right AUDIO IN jacks on your TV and using a Component video cable (not supplied), connect the Green plug Y VIDEO OUT jack on your Unit to Y VIDEO IN jack on your TV, the Blue plug PB/CB VIDEO OUT jack on your Unit to PB/CB VIDEO IN jack on your TV and the Red plug PR/CR VIDEO OUT jack on your Unit to PR/CR VIDEO IN jack on your TV to view the higher quality picture playback. Progressive outputs (DVD) Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video signal. Using the Audio cable (not supplied), connect the left/right AUDIO OUT jacks on your Unit to the left/right AUDIO IN jacks on your TV and using a Component video cable (not supplied), connect the Green plug Y VIDEO OUT jack on your Unit to Y VIDEO IN jack on your TV, the Blue plug PB/CB VIDEO OUT jack on your Unit to PB/CB VIDEO IN jack on your TV and the Red plug PR/CR VIDEO OUT jack on your Unit to PR/CR VIDEO IN jack on your TV to enjoy highest quality picture with less flicker. Connect the component video cable to TV, press SETUP button and select Video Output to YUV. To select the output signal for better picture quality, press the P. SCAN button on the remote control when DVD is stopped. "P. SCAN" will display. Notes: • When progressive output is activated, no video signal is sent from the S-video or RCA (CVBS) video jacks. • Make sure your TV supports progressive scan component video signal, press the P. SCAN button twice until "CVBS" display for going back CVBS video signal. DVD Unit Component video cable (not supplied) To PR/CR VIDEO IN To PB/CB VIDEO IN To Y VIDEO IN To PR/CR VIDEO OUT To PB/CB VIDEO OUT To Y VIDEO OUT (white) (red) Audio cable (not supplied) or Coaxial Antenna Jack Some TVs do not have an RCA or S-Video jack, they only have a coaxial antenna jack. In order to connect this Unit to these TVs, you must purchase an RF modulator (available in the Audio/Video department of most electronics retailers or at http://www.18002526123.com) and follow the instructions included with it. Notes : • Connect the Unit to your TV directly. If you connect the Unit through a VCR, the playback picture will be distorted because DVD discs are copy protected. • When you connect the Unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connection. • For more information, refer to the instruction manual of the connected equipment. E - 11 (continued on next page)