Audiovox DV5007 Owners Manual - Page 13

Setup B. Connecting a VCR 1. Using the supplied Audio/Video cable, connect the yellow plug from VIDEO OUT jack on your Unit to VIDEO IN jack on your TV, connect the left/right AUDIO OUT jacks on your Unit to left/right AUDIO IN jacks on your TV. If you want the sound come from the speakers of the Main Unit, you need not to connect the left/right AUDIO OUT jacks from the Main Unit to your TV. 2. Using the Video cable (not supplied), connect the VIDEO IN (VCR) jack on your Unit to VIDEO OUT jack on your VCR. 3. Using the Audio cable (not supplied), connect the left/right AUDIO IN jacks on your Unit to the AUDIO OUT jacks on your VCR. DVD Unit (yellow) (white) (red) Video cable (not supplied) Audio cable (not supplied) (white) (red) (yellow) Audio/Video cable (supplied) Listen to TV shows through the home theater system Sound from the television does not go to the speakers of the home theater system when you use the suggested connections shown above. To hear sound from TV shows through the home theater system you need to use your VCR as a television tuner. Follow these steps: 1. Connect the VCR as shown above in "Connecting a VCR". 2. Press the FUNCTION button on the DVD Amplifier Unit to go to AV_IN mode, shown on the front panel display. 3. On the television, select the AV input channel that the home theater system is connected to. 4. On the VCR, select the television channel you want to watch. 5. On the DVD amplifier Unit select normal stereo or Pro Logic decoder modes according to your preference. • Please refer to the AV_IN rows of the table on page 16 describing which speakers the sound will come out of. • When using the VCR as a television tuner, you cannot watch one programme while recording another. Watching a DVD 1. Turn on the Unit, use the FUNCTION button on the remote control or the front panel to select "DVD". 2. Turn on your TV and follow the instructions included with it to select the VIDEO input which corresponds to the VIDEO IN jack that is connected to the Unit. Watching a Videotape 1. Turn on the Unit, use the FUNCTION button on the remote control or the front panel on the front panel to select "AV_IN". 2. Turn on your TV and follow the instructions included with it to select the VIDEO input which corresponds to the VIDEO IN jack that is connected to the Unit. 3. Turn on the VCR and follow the instructions included with it to play the videotape. Note: • If you have a mono VCR, the sound volume will be low. E - 12 (continued on next page)