Audiovox FDTV1A Owners Manual - Page 8

FDTV1a 7 Installation (continued) To connect the FDTV1a with the amplifier to a converter box or other tuning device: 1. Make sure your converter box is turned off. FDTV1a Built-In Coaxial Cable ANTENNA Amplifier Insert TV/STB Converter Box Audio/Video Coaxial Cables -or- Cable TV 2. Connect the FDTV1a's built-in cable to the input jack of the amplifier. 3. Connect the amplifier's cable to the antenna input on the converter box. 4. Follow the directions in the manual that came with your converter box to connect it to your TV. 5. Plug the amplifier's power cord into an electrical outlet. Important: This power unit should be plugged in so that it stays vertical or lays flat. 6. Run your converter box's setup routine to scan for available broadcast channels.