Audiovox FPE1708DV Owners Manual - Page 21

TV SETUP TV MENU (For TV Mode Only) 1. Press the MENU button. 2. Use the or button to select TV, then press the button to enter the TV settings. 3. Use the or button to select the options (Antenna, Auto Scan, Auto Scan Add CH, Channel Skip, Channel No., Channel Label or DTV Signal). Adjust them using the or button, or press the button to go into the detailed settings. 4. Press the MENU button to return to the previous menu. 5. Repeat steps 3 and 4 to adjust other options. 6. To exit the MAIN MENU and return to the normal screen, press the EXIT or MENU button repeatedly. Antenna : Air (over-the-air broadcasts, Ch 2-69) or CATV (cable/satellite broadcasts, CH 1-135) mode are available. Auto Scan : Search for usable stations and store them in memory. Auto Scan Add CH : Search for more usable stations and add them in memory. The stations stored before are still kept. Channel Skip : Skip weak channels and the channels you don't like. Channel No. : Select a different TV channel. Channel Label : Display and edit the channel label. DTV Signal : Display the signal strength (for digital TV channels only). Channel Skip 1. Use the or button to select a channel. (Press the button to select the last channel of the page; press again to go to the next page. Press the button to select the first channel of the page; press again to return to the previous page.) 2. Press the ENTER button to shift between On / Off. (Select On to skip the selected channel. The channel will not appear when you press the CH / CH button.) Channel Label You can edit a label for each channel. 1. Use the or button to select the number or letter. Use the or button to move and edit the next character. 2. After editing, the Channel and Channel Label will be shown on the screen when you press the DISPLAY button. FPE1708DV_UL_IB_MSTAR+MTK_E1-20.indd 20 E - 20 4/17/2008 3:00:14 PM