Audiovox FPE3206 Operation Manual - Page 8

Introducing the TV Attach the Speaker to the Display Cautions: 1. Carefully handle the unit during setup and consult authorized service personnel to ensure successful installation. 2. Before performing work spread cushioning over the base area to lay the Display on. This will prevent it from being damaged. 3. Disconnect the AC power cord firstly. The appearance of the unit may differ from the actual one. To deattach the speaker, perform the steps in reverse order. Screw the Speaker and the Fixed board to the unit using the supplied screws and tighten securely, then install the two Connecting covers as the diagram illustrates. Connect the speaker audio cable between the speaker terminals on the unit and the speaker matching polarity according to the terminals' color. Fixed board Screws Connecting cover Fixed board Screws Connecting cover Remove the Stand Cautions: 1. Carefully handle the unit during setup and consult authorized service personnel to ensure successful installation. 2. Before performing work spread cushioning over the base area to lay the Display on. This will prevent it from being damaged. 3. Disconnect the AC power cord firstly. 1 2 Rear cover Take off the rear cover. Do not remove the stand and speaker from the Display unless using an optional bracket to mount it. The appearance of the unit may differ from the actual one. To attach the stand, perform the steps in reverse order. Screws Stand Loosen the screws on the Stand to remove the Stand. 3 Replace the rear cover 7