Audiovox FPE3707HR Operation Manual - Page 14

Connections Cautions before connecting Carefully check the terminals for position and type before making any connections. The illustration of the external equipment may be different depending on your model. Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their terminals. Refer to the user manual of the external device as well. When connecting an external device, turn the power off on the panel to avoid any issues. Connect an Audio Processor or Hi-Fi (Digital Audio) For a full Home Theater sound experience, you must connect your Hi-Fi or Audio processor to the S/PDIF OUT(Optical) terminal on the TV rear. Note: The S/PDIF OUT terminal only can output digital TV program's audio. S-VIDEO L R for software update only RS-232 OR Audio Processor HIFi System S/PDIF IN (Optical) Optical cable Connect a VCR or Video cable Audio cable How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR. Note: For better video, you can use the S-VIDEO terminal if your source supports it. S-VIDEO input uses the same circuit as Video1. S-VIDEO has priority if both connectors are inserted. Use one or the other. S-VIDEO L R S-video cable Cables are often color-coded to connectors. Connect red to red, white to white, etc. To play VCR 1. Turn on your TV, press INPUT button on the remote control to display INPUT SELECT menu, use5/6to select AV1/SVideo and then press OK to confirm. 2. Turn on your VCR , insert a videotape and press the Play button. S-VIDEO AV OUT R AUDIO L VIDEO ANT IN VCR AV IN R AUDIO L VIDEO ANT OUT Rear of the VCR 12