Audiovox FPE709 User Manual - Page 13
Selecting Digital Channels
UPC - 044476067402
View all Audiovox FPE709 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
English 5. Press the LEFT or RIGHT button to select CATV/Air selection for the antenna selection. 6. If you are using the indoor or outdoor antenna, select Air here. Press the DOWN button and select "Auto Scan". 7. If you are using the cable system, select CATV. Press the DOWN button to select "Auto Scan". Use LEFT or RIGHT button to set the Cable System you desire, Auto should be the correct setting for most cable systems. If you choose Air for the antenna selection, the Cable System selection is unavailable. Then press the DOWN button and select "Start to Scan". 8. The TV will start scanning the channels and store the channels found in TV's channel memory. 9. When the scan is complete, the number of channels will be shown on the screen and the TV will tune to the first channel found. 10. Use the same way to select "Auto Scan Add CH" to add more channels to those scanned. NOTE: Press MENU button to interrupt the channel scanning. If the TV didn't find any channel, the Channel up and Down buttons do not function. Selecting Digital Channels You can select specific digital TV stations using your remote control. To select a digital station, enter the channel number followed by "-1". For example, enter "11-1" for the digital channel 11. If available, the digital channel appears. Some digital stations provide multiple broadcasts on a single channel. To access these directly, enter higher numbers after the channel number. For example, "11-2" "11-3" etc. for digital broadcasts of channel 11. If available, these digital channels appear. 13 PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com