Audiovox FR530 Owners Manual - Page 11
Channel Scanning, VOX Function, Dual Watch Mode
UPC - 044476740343
View all Audiovox FR530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Channel Scanning Press function button three times until the SCAN icon flashes. Press the Up or Down button to enable the Scan function (the icon will appear steadily on the display). While in Scan mode, the unit will pause on any active channel for 5 seconds, and then proceed to the next higher channel. The unit will scan channels 1-14 for activity. Scanning will continue until the PTT (2), Function (12) or Up/Down buttons are pressed. NOTE: When in SCAN mode, the transceiver cannot be turned off; exit the SCAN mode first. VOX Function This feature enables you to have hands-free conversation. When using the internal microphone/speaker or external microphone/ headset (purchased separately), your voice or the signal is detected and the radio transmits and receives automatically. To access VOX function, press function button 4 times until VOX icon flashes. Press UP or DOWN button to enable VOX function (icon will appear steadily). Press the function button again and select one of three (L1, L2, L3) VOX sensitivity levels. L1 setting is most sensitive and L3 is least sensitive. Select L1 when in a quiet environment and L3 for a noisy environment. Dual Watch Mode This feature allows monitoring of two channels simultaneously. Press function button repeatedly until "0" appears in the channel number display and the Antenna icon and Call icon flash. Using the v w buttons, choose the alternate channel number you wish to -11- 128-5774E 11 of 32