Audiovox FR530 Owners Manual - Page 13

To Transmit 1. Set the desired primary channel. 2. Press and hold the PTT (Push-to-Talk) button while speaking slowly and clearly in a normal voice, approximately 2 to 3 inches from the microphone. 3. The transmit indicator will illuminate while transmitting. 4. Release the PTT (Push-to-Talk) button when you finish speaking to receive incoming signals. A tone or "Roger Beep" will occur to indicate end of transmission. To Receive. 1. Set the desired channel. 2. Adjust the volume control to the desired listening volume by using the up and down buttons. 3. The transceiver will play strong received signals through its internal speaker or through a headset, if so equipped. Monitor Function The monitor button can be used to play all signals present on a channel. This is useful when communicating with other parties at extreme range. The monitor function can be locked on by pressing the Monitor button for three seconds. When the monitor lock has been activated, the LCD display will indicate "BUSY". Pressing the monitor button a second time will unlock the monitor function. -13- 128-5774E 13 of 32