Audiovox HDP100 User Manual - Page 7
Mounting the, Receiver on the Wall - tv
UPC - 044476059070
View all Audiovox HDP100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Other Setup Options Mounting the Receiver on the Wall 1. Find a good location on your wall for the HDP100 receiver. If you're mounting it behind a TV, make sure you have enough clearance for the cables and the unit. 2. Mark two holes 45mm apart, one on top of the other. Make sure they're plumb (straight up and down). Use the mounting bracket as a guide. 3. Drill 1/4" (6mm) diameter holes for the anchors where you marked. 4. Push the anchors into the wall and make sure they're fully seated. 5. Screw the mounting screws into the anchors until 3-4mm is left between the wall and the head of the screw. 6. Attach the wall mount to the HDP100 receiver using the bracket screws that came in the package. Line up the holes on the wall mount with the holes on the back of the receiver. Insert the bracket screws and tighten. 7. Place the HDP100 on the wall mounting screws as shown and turn 90º clockwise to lock the unit in place. If the unit is loose, rotate it 90º counter-clockwise and pull to remove. Tighten the screws in the wall and remount the unit. 5