Audiovox LXA300 Operation Guide - Page 10
Professional Tip
![]() |
View all Audiovox LXA300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
® Professional Tip Installing in Trunk When installing the amplifier in the trunk, run the power wires along the same path as the other vehicle wiring. Many cars have insulated channels for wiring. You will have to remove the door sill trim and the carpet. Professional Tip Crimp Connections Purchase crimp connectors and crimping tool. Connectors are color coded. 1. Strip 1/4 inch (6mm) of insulation from both wires. 2. Insert into connector. 3. Crimp tightly. You can make permanent splices (using butt connectors) or select connectors that can be removed and reinstalled. 1 2 3 Strip wire 1/4" (6mm) LXA300 Professional Tip Securing Wires Be proud of your installation! Use wire ties to bundle wires together when possible. (But never bundle speaker wires and power wires together!) Secure loose wires to the vehicle to make sure they don't rub or rattle. Professional Tip Speaker and Power Wires Do not run speaker and power wires next to each other. Power wires can generate a "siren" sound in the speakers. Run speaker and power wires on opposite sides of the car. 10
![](/manual_guide/products/audiovox-lxa300-operation-guide-6d2a267/10.png)