Audiovox PCD163 Owners Manual - Page 6

Operating Instructions

Page 6 highlights

PCD163 OPERATING INSTRUCTIONS 1 Power On/Off Button Press the power button (1) to turn the unit on and off when the vehicle ignition switch is on. If the radio is off when the ignition switch is turned off, the power button must be pressed to turn on the radio after the ignition switch is turned on. If the ignition switch is turned off while the radio is on, the radio will come on automatically when the ignition switch is again turned on. 2 Liquid Crystal Display Panel The Liquid Crystal Display (LCD) panel displays the frequency, time, and all activated functions. minimum of "VOL 00" to a maximum of "VOL 46". To decrease the volume, press the volume - button (3b). The display will automatically return to the normal indication 5 seconds after the last volume adjustment or when another function is activated. These buttons are also used in conjunction with the SEL/MENU button (4) to adjust the bass, treble, balance and fader levels. 4 Select (SEL/MENU) Button This SEL/MENU button (4) is used to select the audio function (volume, bass, treble, balance or fade) to be adjusted using the volume buttons (3). Press the SEL/MENU button once to set the unit for volume adjustment ("VOL" and the setting number will appear on the display panel). Press the button additional times to select bass ("BAS" on display panel), treble (TRE), balance (BAL), fader (FAD), and volume (VOL) again. The display returns to the normal indication 5 seconds after the last adjustment was made or when another function is activated. NOTE: It is a characteristic of LCD panels that, if subjected to cold temperatures for an extended period of time, they may take longer to illuminate than under normal conditions. In addition, the visibility of the characters on the LCD may slightly decrease. The LCD read-out will return to normal when the temperature inside the vehicle increases to a normal range. 3 Volume Control To increase the volume level, press the volume + button (3a). The volume will increase and the level will be shown on the display panel from a 1 3a 5 BAND 4 SEL/MENU LOUD MODE MUTE 3b 7 9 2 TRACK PCD163 DISP TUN ING 6 AUX IN RPT SCN 8 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46

PCD163
6
OPERATING INSTRUCTIONS
Power On/Off Button
Press the power button (1) to turn the unit on
and off when the vehicle ignition switch is on. If
the radio is off when the ignition switch is turned
off, the power button must be pressed to turn
on the radio after the ignition switch is turned
on. If the ignition switch is turned off while the
radio is on, the radio will come on automatically
when the ignition switch is again turned on.
Liquid Crystal Display Panel
The Liquid Crystal Display (LCD) panel displays
the frequency, time, and all activated functions.
NOTE: It is a characteristic of LCD panels
that, if subjected to cold temperatures for an
extended period of time, they may take
longer to illuminate than under normal
conditions. In addition, the visibility of the
characters on the LCD may slightly
decrease. The LCD read-out will return to
normal when the temperature inside the
vehicle increases to a normal range.
Volume Control
To increase the volume level, press the volume
+
button (3a). The volume will increase and the
level will be shown on the display panel from a
minimum of “VOL 00” to a maximum of “VOL
46”. To decrease the volume, press the volume
button (3b).
The display will automatically
return to the normal indication 5 seconds after
the last volume adjustment or when another
function is activated. These buttons are also
used in conjunction with the
SEL/MENU
button
(4) to adjust the bass, treble, balance and fader
levels.
Select (SEL/MENU) Button
This
SEL/MENU
button (4) is used to select the
audio function (volume, bass, treble, balance or
fade) to be adjusted using the volume
buttons
(3). Press the
SEL/MENU
button once to set
the unit for volume adjustment (“VOL” and the
setting number will appear on the display
panel). Press the button additional times to
select bass (“BAS” on display panel), treble
(TRE), balance (BAL), fader (FAD), and volume
(VOL) again. The display returns to the normal
indication 5 seconds after the last adjustment
was made or when another function is
activated.
1
2
3
4
RPT
TRACK
SCN
LOUD
AUX IN
DISP
MODE
BAND
T
U
NI
N
G
MUTE
PCD163
SEL/MENU
5
4
3a
3b
9
7
6
1
2
8