Audiovox PCD163 Owners Manual - Page 8

Manual Tuning Control, Source Button MODE, Auxiliary Input, Audio Mute

Page 8 highlights

PCD163 OPERATING INSTRUCTIONS 6 Manual Tuning Control Turn the manual TUNING control (6) clockwise to tune upward in frequency on the band in use or counter-clockwise to tune downward in frequency. The frequency to which you are tuned will be shown in digital format on the display panel. When tuning in a station, always adjust the control so that the correct broadcast frequency is shown on the display and you are receiving a clear signal. If the radio is tuned offfrequency, you could experience distorted audio, noise and other reception problems. 9 Audio Mute Press the MUTE ( ) button (9) to mute the radio volume from the system. "MUTE" will appear on the display panel and the volume will be muted. (If you press this button while a CD is playing, CD play will be paused.) Press MUTE again, or press the volume +/- buttons (3a and 3b) or the SEL/MENU button (4) to return the volume level to the setting in use before the mute function was activated. 7 Source Button (MODE) The MODE button (7) enables selection of radio, disc or auxiliary device playback. When a CD is playing, press the MODE button to revert 3a 2 10 to radio operation. 8 Auxiliary Input To access an auxiliary device: 1. Connect the portable audio player to the AUX IN interface on the front panel (8). 2. Press the MODE button (7) to select Aux In mode. 3. Press MODE again to cancel Aux In mode and go to the next mode. SEL/MENU BAND LOUD MODE MUTE 3b 7 9 TRACK PCD163 DISP TUN ING 6 AUX IN RPT SCN 8 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46

PCD163
8
OPERATING INSTRUCTIONS
Manual Tuning Control
Turn the manual
TUNING
control (6) clockwise
to tune upward in frequency on the band in use
or counter-clockwise to tune downward in
frequency. The frequency to which you are
tuned will be shown in digital format on the
display panel. When tuning in a station, always
adjust the control so that the correct broadcast
frequency is shown on the display and you are
receiving a clear signal. If the radio is tuned off-
frequency, you could experience distorted
audio, noise and other reception problems.
Source Button (MODE)
The
MODE
button (7) enables selection of
radio, disc or auxiliary device playback. When a
CD is playing, press the
MODE
button to revert
to radio operation.
Auxiliary Input
To access an auxiliary device:
1.
Connect the portable audio player to the
AUX IN
interface on the front panel (8).
2.
Press the
MODE
button (7) to select Aux
In mode.
3.
Press
MODE
again to cancel Aux In mode
and go to the next mode.
Audio Mute
Press the
MUTE
(
) button (9) to mute the
radio volume from the system. “MUTE” will
appear on the display panel and the volume will
be muted. (If you press this button while a CD is
playing, CD play will be paused.) Press
MUTE
again, or press the volume
+/–
buttons (3a and
3b) or the
SEL/MENU
button (4) to return the
volume level to the setting in use before the
mute function was activated.
6
7
8
9
RPT
TRACK
SCN
LOUD
AUX IN
DISP
MODE
BAND
T
U
NI
N
G
MUTE
PCD163
SEL/MENU
3a
3b
2
10
8
9
7
6