Audiovox SIR-BB3 User Guide - Page 4

Setting Up and Installing Your Kit, Installation/Wiring Precautions, Contents SIR-BB3 - power cord

Page 4 highlights

Contents SIR-BB3 Users Guide P/N 128-7266A Antenna (P/N 118C1129) AC/DC Power Adapter 1 pc. (P/N 136C3585) 1 pc. Installation/Wiring Precautions 1. If using the adapter, make sure the adapter cable is not connected to an AC wall outlet until all interconnections have been made and verified. The adapter power cable should be connected last. 2. Incorrect installation may cause damage to the system. 3. For antenna positioning, refer to the Antenna Aiming procedure outlined in the Shuttle User Guide, SIR-PNP3 (128-7193A). AC Power Cord (P/N 112B3376) 1 pc. Boom Box (P/N SIR-BB3) AUDIO OX 1 pc. Setting Up and Installing Your Kit NOTE: The SIRIUS® signal can be received and processed virtually anywhere as long as there are no obvious satellite signal obstructions such as high terrain, trees, overhangs, etc. However, signal reception depends mainly on where you are, geographically, and where this place is with respect to the orbital paths of the Sirius satellites. In placing the antenna, therefore, these factors must be taken into account . -4- 128-7266A 4 of 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

128-7266A
4 of 12
Setting Up and Installing Your Kit
NOTE:
The SIRIUSĀ® signal can be received and
processed virtually anywhere as long as there
are no obvioussatellite signal obstructions
such as high terrain, trees, overhangs, etc.
However, signal reception depends mainly on
where you are, geographically, and where this
place is with respect
to the orbital paths of the
Sirius satellites. In placing the antenna,
therefore, these factors must be taken into
account .
Installation/Wiring Precautions
1.
If using the adapter, make sure the adapter cable
is not connected to an AC wall outlet until all inter-
connections have been made and
verified. The
adapter power cable should be connected last.
2.
Incorrect installation may cause damage to the
system.
3.
For antenna positioning, refer to the Antenna
Aiming procedure outlined in the Shuttle User
Guide, SIR-PNP3 (128-7193A).
-4-
Boom Box
(P/N SIR-BB3)
1 pc.
Contents SIR-BB3
Users Guide
P/N 128-7266A
1 pc.
AC/DC Power Adapter
(P/N 136C3585)
1 pc.
Antenna
(P/N 118C1129)
1 pc.
AC Power Cord
(P/N 112B3376)
AUDIO
OX